China Transmission Geared Motor Nmrv Worm Speed Variation Gear Reducer Gearbox comer gearbox

Product Description

Product Description

Method for model chose
Please understand the following at first in order to select the model of NMRV speed reducer properly:
– Loading condition.
– Speed scope or ratio in application.
– Working condition and environment.
– Installation space.

Define working condition Coefficient K1 and revise coefficient K2.
– Ensure machinery load types A, B, C according to table 1.
– Get the working condition coefficient K1 from diagram 1 according to turning time (hour/day) and start
frequency (time/hour).
– Inspect working condition and select coefficient K2 from table 2.

Table 1 Machinery Load classification selection

Using situation Example Load type
Uniform load Convey band (uniform conveying) A(Uniform load)
Moderate Load Speed changed conveying B(Moderate load)
Severe Load Compressor, pulverizer, etc C(Severe load)

Table 2 Working condition coefficient K2

Ambient temperature Working condtion coefficient K2
-10C~30C 1
30C-40C 1.1~1.2

Product Parameters

NMRV worm gear motor

Model RV Model  RV Properties  Motor Model  Motor Properties  Attention
RV075 with 2.2KW NMRV075  L:198.5  2.2KW  Y100  Need to determine hollow or solid
RV090 with 2.2KW NMRV090  L:232.5  2.2KW  Y100 
RV063 with 1.5KW NMRV063  L:167  1.5KW  Y90L 
RV075 with 1.5KW NMRV075  L:198.5  1.5KW  Y90L 
RV090 with 1.5KW NMRV090  L:232.5  1.5KW  Y90L 
RV063 with 1.1KW NMRV063  L:167  1.1KW  Y90S 
RV075 with 1.1KW NMRV075  L:198.5  1.1KW  Y90S 
RV090 with 1.1KW NMRV090  L:232.5  1.1KW  Y90S 
RV050 with 0.75KW NMRV050  L:140  0.75KW  Y80 
RV063 with 0.75KW NMRV063  L:167  0.75KW  Y80 
RV075 with 0.75KW NMRV075  L:198.5  0.75KW  Y80 
RV090 with 0.75KW NMRV090  L:232.5  0.75KW  Y80 

Certifications

Company Profile

HangZhou Welldone Transmission Machinery Co., Ltd. specializes in manufacturing various kinds of small and medium-sized equipment, Three phase asynchronous motor, such as DC motor, AC motor, reducer, planetary reducer, servo reducer, etc. We have professional gear tester (gear all-round inspection), CZPT hardness tester, Rockwell hardness tester (test hardness again to ensure wear resistance), radial runout detection (detect motor running in and balance, so that the motor can reduce wear and no noise during high-speed operation), withstand voltage tester (detect leakage, higher than normal voltage, no leakage), inter turn tester, surge test motor stator winding turn to turn insulation, thickened coil, same power torque output, torque is greater.

The “Welldone” gear reducer produced by our company sells well in provinces, municipalities and autonomous regions of the country. It is widely used in metallurgy, mining, lifting, transportation, petroleum, chemical, textile, pharmaceutical, food, light industry, grain, oil, feed and other industries, and is deeply trusted by customers.
Welcome new and old customers to visit and guide.

FAQ

Q: How to select a suitable motor or gearbox?
A: If you have motor pictures or drawings to show us, or you have detailed specifications, such as, voltage, speed, torque, motor size, working mode of the motor, needed lifetime and noise level etc, please do not hesitate to let us know, then we can recommend suitable motor per your request accordingly.

Q: Do you have a customized service for your standard motors or gearboxes?
A: Yes, we can customize per your request for the voltage, speed, torque and shaft size.

Q: What’s your lead time?
A: Generally speaking, our regular standard product will need 2-7days, a bit longer for customized products. It will depend on the specific orders.

Click here for deep communication.

Main Products

US $12-52
/ Piece
|
1 Piece

(Min. Order)

###

Shipping Cost:

Estimated freight per unit.



To be negotiated|


Freight Cost Calculator

###

Application: Motor, Machinery, Marine
Function: Speed Changing, Speed Reduction, Speed Increase
Layout: Cycloidal

###

Customization:

###

Using situation Example Load type
Uniform load Convey band (uniform conveying) A(Uniform load)
Moderate Load Speed changed conveying B(Moderate load)
Severe Load Compressor, pulverizer, etc C(Severe load)

###

Ambient temperature Working condtion coefficient K2
-10C~30C 1
30C-40C 1.1~1.2

###

Model RV Model  RV Properties  Motor Model  Motor Properties  Attention
RV075 with 2.2KW NMRV075  L:198.5  2.2KW  Y100  Need to determine hollow or solid
RV090 with 2.2KW NMRV090  L:232.5  2.2KW  Y100 
RV063 with 1.5KW NMRV063  L:167  1.5KW  Y90L 
RV075 with 1.5KW NMRV075  L:198.5  1.5KW  Y90L 
RV090 with 1.5KW NMRV090  L:232.5  1.5KW  Y90L 
RV063 with 1.1KW NMRV063  L:167  1.1KW  Y90S 
RV075 with 1.1KW NMRV075  L:198.5  1.1KW  Y90S 
RV090 with 1.1KW NMRV090  L:232.5  1.1KW  Y90S 
RV050 with 0.75KW NMRV050  L:140  0.75KW  Y80 
RV063 with 0.75KW NMRV063  L:167  0.75KW  Y80 
RV075 with 0.75KW NMRV075  L:198.5  0.75KW  Y80 
RV090 with 0.75KW NMRV090  L:232.5  0.75KW  Y80 
US $12-52
/ Piece
|
1 Piece

(Min. Order)

###

Shipping Cost:

Estimated freight per unit.



To be negotiated|


Freight Cost Calculator

###

Application: Motor, Machinery, Marine
Function: Speed Changing, Speed Reduction, Speed Increase
Layout: Cycloidal

###

Customization:

###

Using situation Example Load type
Uniform load Convey band (uniform conveying) A(Uniform load)
Moderate Load Speed changed conveying B(Moderate load)
Severe Load Compressor, pulverizer, etc C(Severe load)

###

Ambient temperature Working condtion coefficient K2
-10C~30C 1
30C-40C 1.1~1.2

###

Model RV Model  RV Properties  Motor Model  Motor Properties  Attention
RV075 with 2.2KW NMRV075  L:198.5  2.2KW  Y100  Need to determine hollow or solid
RV090 with 2.2KW NMRV090  L:232.5  2.2KW  Y100 
RV063 with 1.5KW NMRV063  L:167  1.5KW  Y90L 
RV075 with 1.5KW NMRV075  L:198.5  1.5KW  Y90L 
RV090 with 1.5KW NMRV090  L:232.5  1.5KW  Y90L 
RV063 with 1.1KW NMRV063  L:167  1.1KW  Y90S 
RV075 with 1.1KW NMRV075  L:198.5  1.1KW  Y90S 
RV090 with 1.1KW NMRV090  L:232.5  1.1KW  Y90S 
RV050 with 0.75KW NMRV050  L:140  0.75KW  Y80 
RV063 with 0.75KW NMRV063  L:167  0.75KW  Y80 
RV075 with 0.75KW NMRV075  L:198.5  0.75KW  Y80 
RV090 with 0.75KW NMRV090  L:232.5  0.75KW  Y80 

The Parts of a Gearbox

There are many parts of a Gearbox, and this article will help you understand its functions and components. Learn about its maintenance and proper care, and you’ll be on your way to repairing your car. The complexity of a Gearbox also makes it easy to make mistakes. Learn about its functions and components so that you’ll be able to make the best choices possible. Read on to learn more. Then, get your car ready for winter!
gearbox

Components

Gearboxes are fully integrated mechanical components that consist of a series of gears. They also contain shafts, bearings, and a flange to mount a motor. The terms gearhead and gearbox are not often used interchangeably in the motion industry, but they are often synonymous. Gearheads are open gearing assemblies that are installed in a machine frame. Some newer designs, such as battery-powered mobile units, require tighter integration.
The power losses in a gearbox can be divided into no-load and load-dependent losses. The no-load losses originate in the gear pair and the bearings and are proportional to the ratio of shaft speed and torque. The latter is a function of the coefficient of friction and speed. The no-load losses are the most serious, since they represent the largest proportion of the total loss. This is because they increase with speed.
Temperature measurement is another important preventive maintenance practice. The heat generated by the gearbox can damage components. High-temperature oil degrades quickly at high temperatures, which is why the sump oil temperature should be monitored periodically. The maximum temperature for R&O mineral oils is 93degC. However, if the sump oil temperature is more than 200degF, it can cause seal damage, gear and bearing wear, and premature failure of the gearbox.
Regardless of its size, the gearbox is a crucial part of a car’s drivetrain. Whether the car is a sports car, a luxury car, or a farm tractor, the gearbox is an essential component of the vehicle. There are two main types of gearbox: standard and precision. Each has its own advantages and disadvantages. The most important consideration when selecting a gearbox is the torque output.
The main shaft and the clutch shaft are the two major components of a gearbox. The main shaft runs at engine speed and the countershaft may be at a lower speed. In addition to the main shaft, the clutch shaft has a bearing. The gear ratio determines the amount of torque that can be transferred between the countershaft and the main shaft. The drive shaft also has another name: the propeller shaft.
The gears, shafts, and hub/shaft connection are designed according to endurance design standards. Depending on the application, each component must be able to withstand the normal stresses that the system will experience. Oftentimes, the minimum speed range is ten to twenty m/s. However, this range can differ between different transmissions. Generally, the gears and shafts in a gearbox should have an endurance limit that is less than that limit.
The bearings in a gearbox are considered wear parts. While they should be replaced when they wear down, they can be kept in service much longer than their intended L10 life. Using predictive maintenance, manufacturers can determine when to replace the bearing before it damages the gears and other components. For a gearbox to function properly, it must have all the components listed above. And the clutch, which enables the transmission of torque, is considered the most important component.
gearbox

Functions

A gearbox is a fully integrated mechanical component that consists of mating gears. It is enclosed in a housing that houses the shafts, bearings, and flange for motor mounting. The purpose of a gearbox is to increase torque and change the speed of an engine by connecting the two rotating shafts together. A gearbox is generally made up of multiple gears that are linked together using couplings, belts, chains, or hollow shaft connections. When power and torque are held constant, speed and torque are inversely proportional. The speed of a gearbox is determined by the ratio of the gears that are engaged to transmit power.
The gear ratios in a gearbox are the number of steps a motor can take to convert torque into horsepower. The amount of torque required at the wheels depends on the operating conditions. A vehicle needs more torque than its peak torque when it is moving from a standstill. Therefore, the first gear ratio is used to increase torque and move the vehicle forward. To move up a gradient, more torque is required. To maintain momentum, the intermediate gear ratio is used.
As metal-to-metal contact is a common cause of gearbox failure, it is essential to monitor the condition of these components closely. The main focus of the proactive series of tests is abnormal wear and contamination, while the preventative tests focus on oil condition and additive depletion. The AN and ferrous density tests are exceptions to this rule, but they are used more for detecting abnormal additive depletion. In addition, lubrication is critical to the efficiency of gearboxes.
gearbox

Maintenance

Daily maintenance is a critical aspect of the life cycle of a gearbox. During maintenance, you must inspect all gearbox connection parts. Any loose or damaged connection part should be tightened immediately. Oil can be tested using an infrared thermometer and particle counters, spectrometric analysis, or ferrography. You should check for excessive wear and tear, cracks, and oil leaks. If any of these components fail, you should replace them as soon as possible.
Proper analysis of failure patterns is a necessary part of any preventative maintenance program. This analysis will help identify the root cause of gearbox failures, as well as plan for future preventative maintenance. By properly planning preventative maintenance, you can avoid the expense and inconvenience of repairing or replacing a gearbox prematurely. You can even outsource gearbox maintenance to a company whose experts are knowledgeable in this field. The results of the analysis will help you create a more effective preventative maintenance program.
It is important to check the condition of the gearbox oil periodically. The oil should be changed according to its temperature and the hours of operation. The temperature is a significant determinant of the frequency of oil changes. Higher temperatures require more frequent changes, and the level of protection from moisture and water reduces by 75%. At elevated temperatures, the oil’s molecular structure breaks down more quickly, inhibiting the formation of a protective film.
Fortunately, the gear industry has developed innovative technologies and services that can help plant operators reduce their downtime and ensure optimal performance from their industrial gears. Here are 10 steps to ensure that your gearbox continues to serve its purpose. When you are preparing for maintenance, always keep in mind the following tips:
Regular vibration analysis is a vital part of gearbox maintenance. Increased vibration signals impending problems. Visually inspect the internal gears for signs of spiraling and pitting. You can use engineers’ blue to check the contact pattern of gear teeth. If there is a misalignment, bearings or housings are worn and need replacement. Also make sure the breathers remain clean. In dirty applications, this is more difficult to do.
Proper lubrication is another key factor in the life of gearboxes. Proper lubrication prevents failure. The oil must be free of foreign materials and have the proper amount of flow. Proper lubricant selection depends on the type of gear, reduction ratio, and input power. In addition to oil level, the lubricant must be regulated for the size and shape of gears. If not, the lubricant should be changed.
Lack of proper lubrication reduces the strength of other gears. Improper maintenance reduces the life of the transmission. Whether the transmission is overloaded or undersized, excessive vibration can damage the gear. If it is not properly lubricated, it can be damaged beyond repair. Then, the need for replacement gears may arise. However, it is not a time to waste a lot of money and time on repairs.

China Transmission Geared Motor Nmrv Worm Speed Variation Gear Reducer Gearbox     comer gearbox	China Transmission Geared Motor Nmrv Worm Speed Variation Gear Reducer Gearbox     comer gearbox
editor by czh 2022-12-01

Leave a Reply

Your email address will not be published. Required fields are marked *