Tag Archives: electric motors

China high quality Step-Less Cycloidal Speed Reducer Gearboxes for The Electric Motors of Feeders. planetary gearbox

Product Description

MB-XW step-less variable speed cycloidal reducer is a continuously variable speed reducer composed of step-less speed change plus a one-level cycloidal pinwheel reducer. The 4- pole motor outputs 200-1000rpm through MB step-less speed change and then passes through the cycloidal pinwheel  to realize gear reduction (reduction ratio 17 output speed at 58 ~ 11.5rpm , 23 is the output rotation speed 42 is ~ 8.5 RPM ), as MB75YB-7.5XW6-17 CVT cycloidal reducer, model significance described below.

Our MB-XW step-less cycloid speed reducer gearboxes are suitable for the following Electric motors, which are mainly used as power supply of the coal feeders ( Material Transferring Feeders)

Electric motor Modesl Power
kW
Output speed
r/min
Suited for the following coal feeders A0
mm
B0
mm
d
mm
L
mm
b
mm
d0
mm
MB55YB-5.5XW6-23 5.5 42~8.5 GLD800 275 380 65 89 18 22
MB75YB-7.5XW6-17 7.5 58~11.5 GLD1500 , GLD2200 , GLL500 , GLL800
MB110YB-11XW8-17 11 58~11.5 GLD3300 380 480 90 120 25 22
MB150YB-15XW8-17 15 58~11.5 GLD4000 , GLD4400 380 480 90 120 25 22

Application: Motor
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Gear Shape: Cylindrical Gear
Step: Stepless
Type: Gear Reducer
Samples:
US$ 3000/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

cycloidal gearbox

Materials Used in Manufacturing Cycloidal Gearboxes

Cycloidal gearboxes are constructed using a variety of materials to ensure durability, strength, and efficient operation. Some common materials used include:

  • Steel: Steel is a popular choice due to its high strength and durability. It can withstand heavy loads and provides excellent wear resistance, making it suitable for industrial applications.
  • Aluminum: Aluminum is chosen for its lightweight properties and corrosion resistance. It’s often used in applications where weight is a concern, such as aerospace and robotics.
  • Cast Iron: Cast iron offers good heat dissipation and is known for its high resistance to wear and shock. It’s commonly used in heavy-duty applications that require high torque and strength.
  • Alloys: Various alloy combinations can be used to enhance specific properties such as corrosion resistance, heat resistance, and strength.
  • Plastics and Composites: In some cases, plastic or composite materials may be used, particularly in applications where low noise, lightweight construction, and corrosion resistance are essential.

The material selection depends on factors like the application’s torque, speed, environmental conditions, and desired performance characteristics. Each material offers a unique set of advantages, allowing cycloidal gearboxes to be customized to meet diverse industrial needs.

cycloidal gearbox

History of Cycloidal Gear System Development

The history of cycloidal gear systems dates back to ancient times, with various forms of non-circular gears being used for specialized applications. The concept of the cycloidal gear system as we know it today, however, has evolved over centuries of engineering and innovation:

  • Ancient Roots: The concept of using non-circular gears can be traced back to ancient civilizations, where devices like the “Antikythera Mechanism” (c. 150-100 BC) employed non-circular gear arrangements.
  • Cam Mechanisms: During the Renaissance, engineers and inventors like Leonardo da Vinci explored mechanisms involving cams and followers, which are precursors to modern cycloidal gears.
  • Cycloidal Motion Studies: In the 19th century, engineers and mathematicians like Franz Reuleaux and Robert Willis studied and developed mechanisms based on the principles of cycloidal motion.
  • Early Cycloidal Gearboxes: The development of cycloidal gear systems gained momentum in the late 19th and early 20th centuries, with inventors like Emile Alluard and Louis André creating early forms of cycloidal gear mechanisms and gearboxes.
  • Cycloidal Drive: The term “cycloidal drive” was coined by James Watt in the 18th century, referring to mechanisms that produce a motion resembling a rolling circle.
  • Modern Cycloidal Gearboxes: The development of modern cycloidal gearboxes was further advanced by engineers like Ralph B. Heath, who patented the “Harmonic Drive” in the 1950s. This invention marked a significant step in the advancement and commercialization of precision cycloidal gear systems.
  • Advancements and Applications: Over the decades, cycloidal gear systems have found applications in robotics, aerospace, automation, and other fields that require compactness, precision, and high torque capabilities.

The history of cycloidal gear system development reflects the contributions of many engineers and inventors who have refined and advanced the technology over time. Today, cycloidal gearboxes continue to play a crucial role in various industries and applications.

cycloidal gearbox

How Does a Cycloidal Gearbox Work?

A cycloidal gearbox operates on the principle of cycloidal motion to transmit rotational power. It consists of a set of components that work together to achieve smooth and efficient motion transmission:

  1. High-Speed Input Shaft: The gearbox is connected to a high-speed input shaft, typically driven by an electric motor or another power source.
  2. Cycloidal Pins or Rollers: Surrounding the input shaft are a series of cycloidal pins or rollers arranged in a circular pattern. These pins interact with the lobed profiles of the outer stationary ring.
  3. Outer Stationary Ring: The outer ring remains stationary and contains lobed profiles. The lobes are designed in a way that allows them to engage with the cycloidal pins as they rotate.
  4. Motion Transmission: As the input shaft rotates, it causes the cycloidal pins to move along the circular path. The interaction between the cycloidal pins and the lobed profiles of the outer ring results in a unique motion known as epicycloidal or hypocycloidal motion.

This motion generates torque that is transferred from the input shaft to the output shaft of the gearbox. The main advantage of a cycloidal gearbox is its ability to provide high torque output in a compact design. The multiple points of contact between the pins and the lobes distribute the load, enhancing the gearbox’s load-carrying capacity.

Cycloidal gearboxes are known for their smooth and controlled motion, making them suitable for applications requiring precise positioning and high torque capabilities, such as robotics, automation, and industrial machinery.

China high quality Step-Less Cycloidal Speed Reducer Gearboxes for The Electric Motors of Feeders.   planetary gearbox	China high quality Step-Less Cycloidal Speed Reducer Gearboxes for The Electric Motors of Feeders.   planetary gearbox
editor by CX 2023-10-17

China High Power Low Backlash Gpg Electric AC Geared Reducer Precision Planetary Gearhead Gearbox for Servo Motors dual cycloidal gearbox

Merchandise Description

TaiBang Motor Industry Team Co., Ltd.

The main items is induction motor, reversible motor, DC brush gear motor, DC brushless equipment motor, CH/CV big equipment motors, Planetary equipment motor ,Worm gear motor etc, which employed extensively in various fields of manufacturing pipelining, transportation, foods, medication, printing, cloth, packing, place of work, equipment, entertainment and many others, and is the favored and matched product for automatic machine. 

Model Instruction

GB090-ten-P2

GB 090 571 P2
Reducer Sequence Code External Diameter Reduction Ratio Reducer Backlash
GB:Large Precision Square Flange Output

GBR:Large Precision Proper Angle Sq. Flange Output

GE:Higher Precision Round Flange Output

GER:High Precision Correct Round Flange Output

050:ø50mm
070:ø70mm
090:ø90mm
one hundred twenty:ø120mm
a hundred and fifty five:ø155mm
205:ø205mm
235:ø235mm
042:42x42mm
060:60x60mm
090:90x90mm
a hundred and fifteen:115x115mm
142:142x142mm
180:180x180mm
220:220x220mm
571 signifies 1:ten P0:High Precision Backlash

P1:Precison Backlash

P2:Common Backlash

Main Complex Overall performance
 

Merchandise Quantity of stage Reduction Ratio GB042 GB060 GB060A GB090 GB090A GB115 GB142 GB180 GB220
Rotary Inertia 1 3 .03 .16   .sixty one   3.25 nine.21 28.98 sixty nine.61
4 .03 .fourteen   .forty eight   two.seventy four 7.fifty four 23.sixty seven 54.37
5 .03 .thirteen   .47   two.71 seven.forty two 23.29 fifty three.27
six .03 .13   .45   two.65 7.25 22.75 fifty one.seventy two
seven .03 .thirteen   .45   two.sixty two 7.14 22.forty eight fifty.97
eight .03 .13   .44   two.fifty eight 7.07 22.59 50.eighty four
nine .03 .13   .44   2.fifty seven 7.04 22.53 50.63
ten .03 .thirteen   .forty four   two.fifty seven seven.03 22.fifty one 50.fifty six
2 15 .03 .03 .13 .thirteen .forty seven .forty seven two.seventy one seven.forty two 23.29
20 .03 .03 .13 .13 .forty seven .47 2.seventy one seven.forty two 23.29
twenty five .03 .03 .13 .thirteen .forty seven .47 two.seventy one seven.forty two 23.29
thirty .03 .03 .13 .thirteen .forty seven .47 2.seventy one 7.forty two 23.29
35 .03 .03 .13 .13 .47 .47 2.seventy one 7.forty two 23.29
40 .03 .03 .thirteen .13 .forty seven .forty seven two.71 7.forty two 23.29
forty five .03 .03 .13 .thirteen .47 .47 2.71 seven.42 23.29
fifty .03 .03 .13 .thirteen .forty four .44 two.fifty seven seven.03 22.fifty one
sixty .03 .03 .thirteen .13 .44 .forty four 2.57 seven.03 22.51
70 .03 .03 .thirteen .thirteen .forty four .forty four 2.57 seven.03 22.51
80 .03 .03 .13 .thirteen .forty four .44 two.57 7.03 22.fifty one
ninety .03 .03 .13 .13 .forty four .forty four two.57 seven.03 22.fifty one
a hundred .03 .03 .13 .13 .44 .forty four two.57 7.03 22.51

 

Item Number of stage GB042 GB060 GB060A GB90 GB090A GB115 GB142 GB180 GB220
Backlash(arcmin) High Precision P0 one       ≤1 ≤1 ≤1 ≤1 ≤1 ≤1
two           ≤3 ≤3 ≤3 ≤3
Precision P1 one ≤3 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3
two ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5
Standard P2 1 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5
two ≤7 ≤7 ≤7 ≤7 ≤7 ≤7 ≤7 ≤7 ≤7
Torsional Rigidity(N.M/arcmin) one 3 7 seven fourteen 14 twenty five fifty a hundred forty five 225
two 3 seven 7 fourteen fourteen 25 50 145 225
Noise(dB) one,2 ≤56 ≤58 ≤58 ≤60 ≤60 ≤63 ≤65 ≤67 ≤70
Rated enter speed(rpm) one,2 5000 5000 5000 4000 4000 4000 3000 3000 2000
Max enter velocity(rpm) one,two 10000 10000 10000 8000 8000 8000 6000 6000 4000

 Noise examination common:Length 1m,no load.Calculated with an enter speed 3000rpm 

 

US $50
/ Piece
|
1 Piece

(Min. Order)

###

Application: Machinery, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Reduction
Layout: Cycloidal
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Double-Step

###

Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

GB 090 010 P2
Reducer Series Code External Diameter Reduction Ratio Reducer Backlash
GB:High Precision Square Flange Output

GBR:High Precision Right Angle Square Flange Output

GE:High Precision Round Flange Output

GER:High Precision Right Round Flange Output

050:ø50mm
070:ø70mm
090:ø90mm
120:ø120mm
155:ø155mm
205:ø205mm
235:ø235mm
042:42x42mm
060:60x60mm
090:90x90mm
115:115x115mm
142:142x142mm
180:180x180mm
220:220x220mm
010 means 1:10 P0:High Precision Backlash

P1:Precison Backlash

P2:Standard Backlash

###

Item Number of stage Reduction Ratio GB042 GB060 GB060A GB090 GB090A GB115 GB142 GB180 GB220
Rotary Inertia 1 3 0.03 0.16   0.61   3.25 9.21 28.98 69.61
4 0.03 0.14   0.48   2.74 7.54 23.67 54.37
5 0.03 0.13   0.47   2.71 7.42 23.29 53.27
6 0.03 0.13   0.45   2.65 7.25 22.75 51.72
7 0.03 0.13   0.45   2.62 7.14 22.48 50.97
8 0.03 0.13   0.44   2.58 7.07 22.59 50.84
9 0.03 0.13   0.44   2.57 7.04 22.53 50.63
10 0.03 0.13   0.44   2.57 7.03 22.51 50.56
2 15 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
20 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
25 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
30 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
35 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
40 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
45 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
50 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51
60 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51
70 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51
80 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51
90 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51
100 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51

###

Item Number of stage GB042 GB060 GB060A GB90 GB090A GB115 GB142 GB180 GB220
Backlash(arcmin) High Precision P0 1       ≤1 ≤1 ≤1 ≤1 ≤1 ≤1
2           ≤3 ≤3 ≤3 ≤3
Precision P1 1 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3
2 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5
Standard P2 1 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5
2 ≤7 ≤7 ≤7 ≤7 ≤7 ≤7 ≤7 ≤7 ≤7
Torsional Rigidity(N.M/arcmin) 1 3 7 7 14 14 25 50 145 225
2 3 7 7 14 14 25 50 145 225
Noise(dB) 1,2 ≤56 ≤58 ≤58 ≤60 ≤60 ≤63 ≤65 ≤67 ≤70
Rated input speed(rpm) 1,2 5000 5000 5000 4000 4000 4000 3000 3000 2000
Max input speed(rpm) 1,2 10000 10000 10000 8000 8000 8000 6000 6000 4000
US $50
/ Piece
|
1 Piece

(Min. Order)

###

Application: Machinery, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Reduction
Layout: Cycloidal
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Double-Step

###

Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

GB 090 010 P2
Reducer Series Code External Diameter Reduction Ratio Reducer Backlash
GB:High Precision Square Flange Output

GBR:High Precision Right Angle Square Flange Output

GE:High Precision Round Flange Output

GER:High Precision Right Round Flange Output

050:ø50mm
070:ø70mm
090:ø90mm
120:ø120mm
155:ø155mm
205:ø205mm
235:ø235mm
042:42x42mm
060:60x60mm
090:90x90mm
115:115x115mm
142:142x142mm
180:180x180mm
220:220x220mm
010 means 1:10 P0:High Precision Backlash

P1:Precison Backlash

P2:Standard Backlash

###

Item Number of stage Reduction Ratio GB042 GB060 GB060A GB090 GB090A GB115 GB142 GB180 GB220
Rotary Inertia 1 3 0.03 0.16   0.61   3.25 9.21 28.98 69.61
4 0.03 0.14   0.48   2.74 7.54 23.67 54.37
5 0.03 0.13   0.47   2.71 7.42 23.29 53.27
6 0.03 0.13   0.45   2.65 7.25 22.75 51.72
7 0.03 0.13   0.45   2.62 7.14 22.48 50.97
8 0.03 0.13   0.44   2.58 7.07 22.59 50.84
9 0.03 0.13   0.44   2.57 7.04 22.53 50.63
10 0.03 0.13   0.44   2.57 7.03 22.51 50.56
2 15 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
20 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
25 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
30 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
35 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
40 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
45 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
50 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51
60 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51
70 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51
80 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51
90 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51
100 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51

###

Item Number of stage GB042 GB060 GB060A GB90 GB090A GB115 GB142 GB180 GB220
Backlash(arcmin) High Precision P0 1       ≤1 ≤1 ≤1 ≤1 ≤1 ≤1
2           ≤3 ≤3 ≤3 ≤3
Precision P1 1 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3
2 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5
Standard P2 1 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5
2 ≤7 ≤7 ≤7 ≤7 ≤7 ≤7 ≤7 ≤7 ≤7
Torsional Rigidity(N.M/arcmin) 1 3 7 7 14 14 25 50 145 225
2 3 7 7 14 14 25 50 145 225
Noise(dB) 1,2 ≤56 ≤58 ≤58 ≤60 ≤60 ≤63 ≤65 ≤67 ≤70
Rated input speed(rpm) 1,2 5000 5000 5000 4000 4000 4000 3000 3000 2000
Max input speed(rpm) 1,2 10000 10000 10000 8000 8000 8000 6000 6000 4000

Cyclone Gearbox Vs Involute Gearbox

Whether you’re using a cycloidal gearbox or an involute gearbox for your application, there are a few things you should know. This article will highlight some of those things, including: cycloidal gearbox vs involute gearbox, weight, compressive force, precision, and torque density.helical gearbox

Compressive force

Several studies have been carried out to analyze the static characteristics of gears. In this article, the authors investigate the structural and kinematic principles of a cycloidal gearbox. The cycloidal gearbox is a gearbox that uses an eccentric bearing inside a rotating frame. It has no common pinion-gear pair, and is therefore ideal for a high reduction ratio.
The purpose of this paper is to investigate the stress distribution on a cycloidal disc. Various gear profiles are investigated in order to study the load distribution and dynamic effects.
Cycloidal gearboxes are subject to compression and backlash, which require the use of proper ratios for the bearing rate and the TSA. The paper also focuses on the kinematic principles of the reducer. In addition, the authors use standard analysis techniques for the shaft/gear and the cycloidal disc.
The authors previously worked on a rigid body dynamic simulation of a cycloidal reducer. The analysis used a trochoidal profile on the cycloidal disc periphery. The trochoidal profile is obtained from a manufacturing drawing and takes into account the tolerances.
The mesh density in the cycloidal disc captures the exact geometry of the parts. It provides accurate contact stresses.
The cycloidal disc consists of nine lobes, which move by one lobe per rotation of the drive shaft. However, when the disc is rotated around the pins, the cycloidal disc does not move around the center of gravity. Therefore, the cycloidal disc shares torque load with five outer rollers.
A low reduction ratio in a cycloidal gearbox results in a higher induced stress in the cycloidal disc. This is due to the bigger hole designed to reduce the material inside the disc.

Torque density

Several types of magnetic gearboxes have been studied. Some magnetic gearboxes have a higher torque density than others, but they are still not able to compete with the mechanical gearboxes.
A new high torque density cycloidal magnetic gearbox using Halbach rotors has been developed and is being tested. The design was validated by building a CPCyMG prototype. The results showed that the simulated slip torque was comparable to the experimental slip torque. The peak torque measured was a p3 = 14 spatial harmonic, and it corresponds to the active region torque density of 261.4 N*m/L.
This cycloidal gearbox also has a high gear ratio. It has been tested to achieve a peak torque of 147.8 Nm, which is more than double the torque density of the traditional cycloidal gearbox. The design incorporates a ferromagnetic back-support that provides mechanical fabrication support.
This cycloidal gearbox also shows how a small diameter can achieve a high torque density. It is designed with an axial length of 50mm. The radial deflection forces are not serious at this length. The design uses a small air gap to reduce the radial deflection forces, but it is not the only design option.
The trade-off design also has a high volumetric torque density. It has a smaller air gap and a higher mass torque density. It is feasible to make and mechanically strong. The design is also one of the most efficient in its class.
The helical gearing design is a newer technology that brings a higher level of precision to a cycloidal gearbox. It allows a servomotor to handle a heavy load at high cycle rates. It is also useful in applications that require smaller design envelopes.helical gearbox

Weight

Compared to planetary gearboxes, the weight of cycloidal gearboxes is not as significant. However, they do provide some advantages. One of the most significant features is their backlash-free operation, which helps them deliver smooth and precise movement.
In addition, they provide high efficiency, which means that servo motors can run at higher speeds. The best part is that they do not need to be stacked up in order to achieve a high ratio.
Another advantage of cycloidal gearboxes is that they are usually less expensive than planetary gearboxes. This means that they are suitable for the manufacturing industry and robotics. They are also suited for heavy-duty robots that require a robust gearbox.
They also provide a better reduction ratio. Cycloidal gears can achieve reduction ratios from 30:1 to 300:1, which is a huge improvement over planetary gears. However, there are few models available that provide a ratio below 30:1.
Cycloidal gears also offer more resistance to wear, which means that they can last longer than planetary gears. They are also more compact, which helps them achieve high ratios in a smaller space. The design of cycloidal gears also makes them less prone to backlash, which is one of the major shortcomings of planetary gearboxes.
In addition, cycloidal gears can also provide better positioning accuracy. In fact, this is one of the primary reasons for choosing cycloidal gears over planetary gears. This is because the cycloid disc rotates around a bearing independently of the input shaft.
Compared to planetary gearboxes, cycloidal gears are also much shorter. This means that they provide the best positioning accuracy. They are also 50% lighter, meaning that they have a smaller diameter.

Precision

Several experts have studied the cycloidal gearbox in precision reducers. Their research mainly focuses on the mathematical model and the method for precision evaluation of cycloidal gears.
The traditional modification design of cycloidal gears is mainly realized by setting various machining parameters and center position of the grinding wheel. But it has some disadvantages because of unstable meshing accuracy and uncontrollable tooth profile curve shape.
In this study, a new method of modification design of cycloidal gears is proposed. This method is based on the calculation of meshing backlash and pressure angle distribution. It can effectively pre-control the transmission accuracy of cycloid-pin gear. It can also ensure good meshing characteristics.
The proposed method can be applied in the manufacture of rotary vector reducers. It is also applicable in the precision reducer for robots.
The mathematical model for cycloidal gears can be established with the pressure angle a as a dependent variable. It is possible to calculate the pressure angle distribution and the profile pressure angle. It can also be expressed as DL=f(a). It can be applied in the design of precision reducers.
The study also considers the root clearance, the backlash of gear teeth and the profile angle. These factors have a direct effect on the transmission performance of cycloidal gear. It also indicates the higher motion accuracy and the smaller backlash. The modified profile can also reflect the smaller transmission error.
In addition, the proposed method is also based on the calculation of lost motion. It determines the angle of first tooth contacts. This angle is an important factor affecting the modification quality. The transmission error after the second cycloid method is the least.
Finally, a case study on the CZPT RV-35N gear pair is shown to prove the proposed method.helical gearbox

Involute gears vs cycloidal gears

Compared to involute gears, cycloidal gears have a lower noise, less friction, and last longer. However, they are more expensive. Cycloidal gears can be more difficult to manufacture. They may be less suitable for certain applications, including space manipulators and robotic joints.
The most common gear profile is the involute curve of a circle. This curve is formed by the endpoint of an imaginary taut string unwinding from the circle.
Another curve is the epicycloid curve. This curve is formed by the point rigidly attached to the circle rolling over another circle. This curve is difficult to produce and is much more expensive to produce than the involute curve.
The cycloid curve of a circle is also an example of the multi-cursor. This curve is generated by the locus of the point on the circle’s circumference.
The cycloid curve has the same diameter as the involute curve, but is tangentially curving along the circle’s diameter. This curve is also classified as ordinary. It has several other functions. The FE method was used to analyze the strain state of cycloidal speed reducers.
There are many other curves, but the involute curve is the most widely used gear profile. The involute curve of a circle is a spiraling curve traced by the endpoint of an imaginary tautstring.
Involute gears are a lot like a set of Lego blocks. They are a lot of fun to play with. They also have a lot of advantages. For example, they can handle center sifts better than cycloidal gears. They are also much easier to manufacture, so the cost of involute teeth is lower. However, they are obsolete.
Cycloidal gears are also more difficult to manufacture than involute gears. They have a convex surface, which leads to more wear. They also have a simpler shape than involute gears. They also have less teeth. They are used in rotary motions, such as in the rotors of screw compressors.
China High Power Low Backlash Gpg Electric AC Geared Reducer Precision Planetary Gearhead Gearbox for Servo Motors     dual cycloidal gearboxChina High Power Low Backlash Gpg Electric AC Geared Reducer Precision Planetary Gearhead Gearbox for Servo Motors     dual cycloidal gearbox
editor by czh 2022-12-25

in Sanliurfa Turkey sales price shop near me near me shop factory supplier Powerful Dual Drive Electric Bicycle Conversion Kit with Front&Rear BLDC Hub Motors manufacturer best Cost Custom Cheap wholesaler

  in Sanliurfa Turkey  sales   price   shop   near me   near me shop   factory   supplier Powerful Dual Drive Electric Bicycle Conversion Kit with Front&Rear BLDC Hub Motors manufacturer   best   Cost   Custom   Cheap   wholesaler

If you are interested in any of our merchandise or would like to go over a possible purchase, make sure you feel totally free to speak to us. We examine each and every piece of bearing by ourselves just before shipping. With comprehensive requirments, we can also produce your specific made product.

EPTTful Dual Push Electric Bicycle Conversion Package with Entrance ampRear BLDC Hub EPTs

100G E-Bicycle Kit Check out-D is Twin-Travel Conversion kit. It is innovative, pedal-assist and high- torque. The crucial functions are as below:

one. Creative
The earliest twin-EPT conversion package for electrical bicycle, supplying a EPT remedy for people who want to climb steep sXiHu (West EPT) Dis.Hu (West EPT) Dis.es or have weighty items.
two. Pedal-support
Offering pedal-aid purpose and no need to have to set up PAS sensor independently.
3. EPT-Torque
The EPTT of twin 500w motors (front and rear) is lager than a solitary 1300w motor.
four. Broad Adaptability
Ideal for kinds of bikes (mountain bike, highway bike amp racing bicycle) and a assortment of wheel dimensions.

SPECIFICATION

Item Details

EPTT AND Shipping and delivery

EPTT content: Very good carton box with foam

EPTT dimensions:
16”: 40*forty*25cm
twenty quot: 50*50*25cm
24 quot: 55*fifty five*25cm
26 quot: 60*60*25cm
28 quot700c 29 quot: sixty five*sixty five*25cm

Shipping:
We normally ship sample by categorical , bulk orEPTTby sea
The delivery time is seven daEPTTfor sample , and fifteen-30daEPTTfor bulk

FAQ

one. Q:Can I spot sample orders?
A: Indeed, but an further sample EPT would be required is dependent on the product you select.

2. Q: What is actually your shipping and delivery time?
A: For sample we normally shipping in seven daEPTTafter receiving your deposit if there aren’t any EPTT requests. And for quanitties the time would be EPTTer.

3. Q: What is your payment expression?
A: T/T 30% deposit before generation and 70% balance ahead of transport or obtaining the copy of B/L.

four. Q: What is your warranty time period?

A: We offer 1 12 months warranty for battery and 2 yr warranty for other parts.

five. Q: Do you have products in inventory?
A: Sure, we have some typical areas in inventory to make certain the shipping time.

6. Q: How do you control the quality?
A: We have QC folks for objects examination at the finish of production. Ahead of the cargo, each portion would be completely tested.

seven. Q: OEM is attainable or not?
A: Indeed.

Any inquiries, you should feel free to get in touch with us.

  in Sanliurfa Turkey  sales   price   shop   near me   near me shop   factory   supplier Powerful Dual Drive Electric Bicycle Conversion Kit with Front&Rear BLDC Hub Motors manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Sanliurfa Turkey  sales   price   shop   near me   near me shop   factory   supplier Powerful Dual Drive Electric Bicycle Conversion Kit with Front&Rear BLDC Hub Motors manufacturer   best   Cost   Custom   Cheap   wholesaler

Ce supplier made in China – replacement parts – in Samut Prakan Thailand UL Approved Electric Motors, Three Phase AC Motor, Induction Motors, Single Phase Motors with top quality

Ce  supplier  made in China - replacement parts -  in Samut Prakan Thailand  UL Approved Electric Motors, Three Phase AC Motor, Induction Motors, Single Phase Motors with top quality

We – EPG Group the greatest gearbox & motors , couplings and gears manufacturing unit in China with 5 various branches. For a lot more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

Ce Authorized Electric powered motors, AC Motors, Induction Motors, Solitary Phase Motors

Attributes:
one. Great functionality, protected and dependable procedure
2. Reduced noise, lower vibration and mild fat
three. Utilized for family appliance, swimming pool pumps, fan and recording meters
four. Mounting dimensions conform to IEC expectations

Specification:

Power .06 ~ 315kw
Frame Dimensions fifty six ~ 355
Phase One or A few
Efficiency Class IE1 ~ IE4
Poles two, 4, 6, 8 poles
Defense Course IP44, IP54, IP55, IP56
Insulation Class B, F, H
Mounting Variety B14, B3, B5, B35, B34
Ambient Temperature -15 ~ +forty °C
Altitude ≤1000M
Material Aluminum/Forged Iron

FAQ

Q: Can you make the electric powered motor with customization?
A: Yes, we can customise for each your ask for, like energy, voltage, velocity, shaft measurement, wires, connectors, capacitors, terminal box, IP quality, etc.

Q: Do you provide samples?
A: Of course. Sample is accessible for screening.

Q: What is your MOQ?
A: It is 10pcs for the beginning of our enterprise.

Q: What is your direct time?
A: Regular item require 5-30days, a little bit longer for custom-made merchandise.

Q: Do you offer technology assist?
A: Indeed. Our business have style and growth staff, we can give technology help if you
require.

Q: How to ship to us?
A: It is available by air, or by sea, or by teach.

Q: How to shell out the cash?
A: T/T and L/C is preferred, with different currency, which includes USD, EUR, RMB, and so forth.

Q: How can I know the solution is suitable for me?
A: >1ST confirm drawing and specification >2nd examination sample >3rd start mass production.

Q: Can I occur to your organization to pay a visit to?
A: Sure, you are welcome to check out us at any time.

Q: How shall we get in touch with you?
A: You can send inquiry directly, and we will reply inside 24 several hours.
 

The use of unique equipment manufacturer’s (OEM) element figures or logos , e.g. CASE® and John Deere® are for reference reasons only and for indicating item use and compatibility. Our organization and the detailed replacement elements contained herein are not sponsored, accepted, or created by the OEM.

Ce  supplier  made in China - replacement parts -  in Samut Prakan Thailand  UL Approved Electric Motors, Three Phase AC Motor, Induction Motors, Single Phase Motors with top quality

Ce  supplier  made in China - replacement parts -  in Samut Prakan Thailand  UL Approved Electric Motors, Three Phase AC Motor, Induction Motors, Single Phase Motors with top quality