Tag Archives: low price gearbox

China best Flange Output Low Backlash 0.05-1.5kw Motor Reducer & Gear Reducer Gearbox Price small cycloidal gearbox

Product Description

Product Description

Flange output low backlash 0.05-1.5KW motor reducer & gear reducer gearbox price

WF series motor reducer & gear reducer gearbox for 5 axis machining center developed and manufactured by WEITENSTAN together with German and ZheJiang technicians for many years.

High precision miniature cycloidal gearbox has the characteristics of smaller, ultra-thin, lightweight and high rigidity, anti-overload and high torque. With good deceleration performance, smooth operation and accurate positioning can be achieved. Integrated design, can be directly connected with the motor, to achieve high precision, high rigidity, high durability and other advantages. It is designed for high speed ratio, high geometric accuracy, low motion loss, large torque capacity and high stiffness applications. The compact design (minimum OD ≈40mm, currently the world’s smallest precision cycloidal pin-wheel reducer) allows it to be installed in limited Spaces.

Reducer drawings

Detailed Photos

 

Product Advantage

Flange output low backlash 0.05-1.5KW motor reducer & gear reducer gearbox price
advantages:

 

1, fine precision cycloidal structure

Ultra flat shape is achieved through differential reduction mechanism and thin cross roller bearing, contributing to the compact size of the equipment. The combination of small size and unmatched superior parameters achieves the best combination of performance, price and size (high cost performance).

 

2. Excellent accuracy (transmission loss ≤1 arcmin)

Through the complex meshing of precision cycloid gear and high precision roller pin, higher transmission accuracy is achieved while maintaining small size and high speed ratio.

 

3, high rigidity

Increase the mesh rate to disperse the load, so the rigidity is high.

 

4. High overload capacity

It maintains trouble-free operation under abnormally low noise and vibration conditions while ensuring excellent overturning and torsional stiffness parameters. Integrated axial radial cross roller bearings, high load capacity and overload capacity of the reducer, can ensure users to provide a variety of temperature range of applications.

 

5, the motor installation is simple

Electromechanical integration design, can be directly connected with the motor, any brand of motor can be installed directly, without adding any device.

 

6. Maintenance free

Seal grease to achieve maintenance free. No refueling, no mounting direction restrictions.

 

7, stable performance

The manufacturing process of high wear-resistant materials and high precision parts has been certified by ISO9000 quality system, which guarantees the reliable operation of the reducer.

 

Product Classification

 

WF Series
High Precision Miniature Reducer

WF series is a high precision micro cycloidal reducer with flange, which has a wide range of applications. This series of reducers includes precise reduction mechanisms and radial – axial roller bearings. The unique design allows load to act directly on the output flange or housing without additional bearings. WF series reducer is characterized by module design, can be installed through the flange motor and reducer, belongs to the motor directly connected reducer.

WFH Series
High Precision Miniature Reducer

WFH series is a hollow form of high precision miniature cycloidal reducer, wire, compressed air pipeline, drive shaft can be through the hollow shaft, non-motor direct connection type reducer. The WFH series is fully sealed, full of grease and includes precise deceleration mechanism and radial – axial roller bearings. The unique design allows load to be acted directly on the output flange or housing without additional bearings.

WR Series
high-precision corner reducer

The WR series is a flange output corner reducer. Like the WF and WFH series, it is a high-precision reducer (backlash less than 1 arc.min), and the level 2 can also be within 1 arc.min, which is higher than other types. Corner type reducer. It can replace the harmonic drive reducer, and its life and rigidity are more than 3 times that of the harmonic.

 

Product Parameters

Size reduction ratio Rated output moment Allowable torque of start and stop Instantaneous allowable moment Rated input speed Maximum input speed Tilt stiffness Torsional stiffness No-load starting torque Transmission accuracy Error accuracy Moment of inertia Weight
  Axis rotation Shell rotation Nm Nm Nm rpm rpm Nm/arcmin Nm/arcmin Nm arcmin arcmin kg-m² kg
WF07 21 20 15 30 45 3000 6000 6 1.1 0.12 P1≤±1           P2≤±3 P1≤±1           P2≤±3 0.52 0.42
41 40 0.11 0.47
WF17 21 20 50 100 150 3000 6000 28 6 0.21 P1≤±1           P2≤±3 P1≤±1           P2≤±3 0.88 0.85
41 40 0.18 0.72
61 60 0.14 0.69
WF25 21 20 110 220 330 3000 5500 131 24 0.47 P1≤±1           P2≤±3 P1≤±1           P2≤±3 6.12 2
31 30 0.41 5.67
41 40 0.38 4.9
51 50 0.35 4.56
81 80 0.31 4.25
WF32 25 24 190 380 570 3000 4500 240 35 1.15 P1≤±1           P2≤±3 P1≤±1           P2≤±3 11 4.2
31 30 1.1 10.8
51 50 0.77 9.35
81 80 0.74 8.32
101 100 0.6 7.7
WF40 25 24 320 640 960 3000 4000 377 50 1.35 P1≤±1           P2≤±3 P1≤±1           P2≤±3 13.2 6.6
31 30 1.32 12.96
51 50 0.92 11.22
81 80 0.81 9.84
121 120 0.72 8.4

Installation Instructions

 

Company Profile

 

Q: Speed reducer grease replacement time
A: When sealing appropriate amount of grease and running reducer, the standard replacement time is 20000 hours according to the aging condition of the grease. In addition, when the grease is stained or used in the surrounding temperature condition (above 40ºC), please check the aging and fouling of the grease, and specify the replacement time.

Q: Delivery time
A: Fubao has 2000+ production base, daily output of 1000+ units, standard models within 7 days of delivery.

Q: Reducer selection
A: Fubao provides professional product selection guidance, with higher product matching degree, higher cost performance and higher utilization rate.

Q: Application range of reducer
A: Fubao has a professional research and development team, complete category design, can match any stepping motor, servo motor, more accurate matching.

 

Shipping Cost:

Estimated freight per unit.



To be negotiated
Application: Motor, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Horizontal Type

helical gearbox

The Cyclonoidal Gearbox

Basically, the cycloidal gearbox is a gearbox that uses a cycloidal motion to perform its rotational movement. It is a very simple and efficient design that can be used in a variety of applications. A cycloidal gearbox is often used in applications that require the movement of heavy loads. It has several advantages over the planetary gearbox, including its ability to be able to handle higher loads and higher speeds.

Dynamic and inertial effects of a cycloidal gearbox

Several studies have been conducted on the dynamic and inertial effects of a cycloidal gearbox. Some of them focus on operating principles, while others focus on the mathematical model of the gearbox. This paper examines the mathematical model of a cycloidal gearbox, and compares its performance with the real-world measurements. It is important to have a proper mathematical model to design and control a cycloidal gearbox. A cycloidal gearbox is a two-stage gearbox with a cycloid disc and a ring gear that revolves around its own axis.
The mathematical model is made up of more than 1.6 million elements. Each gear pair is represented by a reduced model with 500 eigenmodes. The eigenfrequency for the spur gear is 70 kHz. The modally reduced model is a good fit for the cycloidal gearbox.
The mathematical model is validated using ABAQUS software. A cycloid disc was discretized to produce a very fine model. It requires 400 element points per tooth. It was also verified using static FEA. This model was then used to model the stiction of the gears in all quadrants. This is a new approach to modelling stiction in a cycloidal gearbox. It has been shown to produce results comparable to those of the EMBS model. The results are also matched by the elastic multibody simulation model. This is a good fit for the contact forces and magnitude of the cycloid gear disc. It was also found that the transmission accuracy between the cycloid gear disc and the ring gear is about 98.5%. However, this value is lower than the transmission accuracy of the ring gear pair. The transmission error of the corrected model is about 0.3%. The transmission accuracy is less because of the lower amount of elastic deformation on the tooth flanks.
It is important to note that the most accurate contact forces for each tooth of a cycloid gearbox are not smooth. The contact force on a single tooth starts with a linear rise and then ends with a sharp drop. It is not as smooth as the contact force on a point contact, which is why it has been compared to the contact force on an ellipse contact. However, the contact on an ellipse contact is still relatively small, and the EMBS model is not able to capture this.
The FE model for the cycloid disc is about 1.6 million elements. The most important part of the FE model is the discretization of the cycloid disc. It is very important to do the discretization of the cycloid gear disc very carefully because of the high degree of vibration that it experiences. The cycloid disc has to be discretized finely so that the results are comparable to those of a static FEA. It has to be the most accurate model possible in order to be able to accurately simulate the contact forces between the cycloid disc and the ring gear.helical gearbox

Kinematics of a cycloidal drive

Using an arbitrary coordinate system, we can observe the motion of components in a cycloidal gearbox. We observe that the cycloidal disc rotates around fixed pins in a circle, while the follower shaft rotates around the eccentric cam. In addition, we see that the input shaft is mounted eccentrically to the rolling-element bearing.
We also observe that the cycloidal disc rotates independently around the eccentric bearing, while the follower shaft rotates around an axis of symmetry. We can conclude that the cycloidal disc plays a pivotal role in the kinematics of a cycloidal gearbox.
To calculate the efficiency of the cycloidal reducer, we use a model that is based on the non-linear stiffness of the contacts. In this model, the non-linearity of the contact is governed by the non-linearity of the force and the deformation in the contact. We have shown that the efficiency of the cycloidal reducer increases as the load increases. In addition, the efficiency is dependent on the sliding velocity and the deformations of the normal load. These factors are considered as the key variables to determine the efficiency of the cycloidal drive.
We also consider the efficiency of the cycloidal reducer with the input torque and the input speed. We can calculate the efficiency by dividing the net torque in the ring gear by the output torque. The efficiency can be adjusted to suit different operating conditions. The efficiency of the cycloidal drive is increased as the load increases.
The cycloidal gearbox is a multi-stage gearbox with a small shaft oin and a big shaft. It has 19 teeth and brass washers. The outer discs move in opposition to the middle disc, and are offset by 180 deg. The middle disc is twice as massive as the outer disc. The cycloidal disc has nine lobes that move by one lobe per drive shaft revolution. The number of pins in the disc should be smaller than the number of pins in the surrounding pins.
The input shaft drives an eccentric bearing that is able to transmit the power to the output shaft. In addition, the input shaft applies forces to the cycloidal disk through the intermediate bearing. The cycloidal disk then advances in 360 deg/pivot/roller steps. The output shaft pins then move around in the holes to make the output shaft rotate continuously. The input shaft applies a sinusoidal motion to maintain the constant speed of the base shaft. This sine wave causes small adjustments to the follower shaft. The forces applied to the internal sleeves are a part of the equilibrium mechanism.
In addition, we can observe that the cycloidal drive is capable of transmitting a greater torque than the planetary gear. This is due to the cycloidal gear’s larger axial length and the ring gear’s smaller hole diameter. It is also possible to achieve a positive fit between the fixed ring and the disc, which is achieved by toothing between the fixed ring and the disc. The cycloidal disk is usually designed with a short cycloid to minimize unbalance forces at high speeds.helical gearbox

Comparison with planetary gearboxes

Compared to planetary gearboxes, the cycloidal gearbox has some advantages. These advantages include: low backlash, better overload capacity, a compact design, and the ability to perform in a wide range of applications. The cycloidal gearbox has become popular in the multi-axis robotics market. The gearbox is also increasingly used in first joints and positioners.
A cycloidal gearbox is a gearbox that consists of four basic components: a cycloid disk, an output flange, a ring gear, and a fixed ring. The cycloid disk is driven by an eccentric shaft, which advances in a 360deg/pivot/roller step. The output flange is a fixed pin disc that transmits the power to the output shaft. The ring gear is a fixed ring, and the input shaft is connected to a servomotor.
The cycloidal gearbox is designed to control inertia in highly dynamic situations. These gearboxes are generally used in robotics and positioners, where they are used to position heavy loads. They are also commonly used in a wide range of industrial applications. They have higher torque density and a low backlash, making them ideal for heavy loads.
The output flange is also designed to handle a torque of up to 500 Nm. Its rotational speed is lower than the planet gearbox, but its output torque is much higher. It is designed to be a high-performance gearbox, and it can be used in applications that need high ratios and a high level of torque density. The cycloid gearbox is also less expensive and has less backlash. However, the cycloidal gearbox has disadvantages that should be considered when designing a gearbox. The main problem is vibrations.
Compared to planetary gearboxes, cycloidal gearboxes have a smaller overall size and are less expensive. In addition, the cycloid gearbox has a large reduction ratio in one stage. In general, cycloidal gearboxes have single or two stages, with the third stage being less common. However, the cycloid gearbox is not the only type of gearbox that has this type of configuration. It is also common to find a planetary gearbox with a single stage.
There are several different types of cycloidal gearboxes, and they are often referred to as cycloidal speed reducers. These gearboxes are designed for any industry that uses servos. They are shorter than planetary gearboxes, and they are larger in diameter for the same torque. Some of them are also available with a ratio lower than 30:1.
The cycloid gearbox can be a good choice for applications where there are high rotational speeds and high torque requirements. These gearboxes are also more compact than planetary gearboxes, and are suitable for high-torque applications. In addition, they are more robust and can handle shock loads. They also have low backlash, and a higher level of accuracy and positioning accuracy. They are also used in a wide range of applications, including industrial robotics.
China best Flange Output Low Backlash 0.05-1.5kw Motor Reducer & Gear Reducer Gearbox Price   small cycloidal gearboxChina best Flange Output Low Backlash 0.05-1.5kw Motor Reducer & Gear Reducer Gearbox Price   small cycloidal gearbox
editor by CX 2023-05-26

China Durable Using Low Price China EPT ZLYJ 146173200225250280315330375420450 series plastic extruder gearbox synchromesh gearbox

Guarantee: 1 12 months, 1 Yr
Applicable Industries: Manufacturing Plant, Equipment Fix Stores, Farms, Strength & Mining
Bodyweight (KG): fifty KG
Customized assist: OEM, ODM
Gearing Arrangement: Helical / Cycloidal
Output Torque: leading to 37000NM
Input Speed: 500/750/one thousand/1500/3000rpm
Output Velocity: .5-2000rpm
Product name: CZPT transmission gearbox/ reducer for solitary extruder
Mounting Placement: Horizontal (foot Mounted)
Color: Blue/ crimson/green As your request
Software: Device Tool
Substance: Cast Iron
Variety: CZPT collection plastic extruder gearbox
Certificate: ISO9001
Product: ZLYJ112/133/146/173/200/225/250/280/315/330/375/420/450/560/630
Ratio: 8/10/twelve.5/14/16/18/20
Packaging Specifics: Modest dimension: common export packing (carton and pallet) Huge dimension: fumigated wood carton or non-wooden packing content carton
Port: ZheJiang or HangZhou

SpecificationZLYJ series speed reducer is large precision difficult teeth surfac transmission element with drive stand made for plastic screw extruder. The layout of merchandise adapts all specialized laws stipulated in JB/T9571-1999It characteristic that gear and parts of haltare made from higher toughness alloy metal. The gear is created by means of a variety of processing technologies such as carburizing, 2.38×4.76×2.38mm ABEC7 P4 Higher Velocity Ceramic Dental Handpiece Bearing SR133TLZWN with Torlon Cage quench.ing, enamel grinding, and many others. The precision of gear is the quality of GB10095-88.6. The hardness of teeth area reaches HRC54-62. AT the front conclude of hollow output shaft, t is equipped with tremendous thrust bean earing.o seal and so forth, adapt domestic quali.ing to stand up to the doing work recoil. The principal normal components, this kind of as fed products. As request. t can also be geared up with importedproducts. It festures compact, substantial recognized ability. secure transmission, PTO Push Shaft for Agricultural Software minimal sounds, higher effectiveness, and so forth. The house of item sreached global superior degree and can change the identical imported items.The specification and transmission ratio in the collection goods arecommon day of buyers. When choosing, buyers can com-pareactual transmission torque of screw with the permitted output torque detailed in desk 2. (the torque in the table has regarded as functioning condion co-efficient and secure co-productive, it might bechosen in 1: 1directly )and may possibly decide on with the output torque asbase. If it need to have to be outfitted with rubber extruder, the rubber extruder has stronger affect power than plastic extruder. Please provide detailded complex parameters and consult the build-ment office of our business and then make a decision the design to be picked

Specification
TypeZLYJ sequence plastic extruder gearbox
Material Cast Iron
ColorAs your ask for
ModelZLYJ112/133/146/173/200/225/250/280/315/330/375/420/450/560/630
Input pace1500/1200/a thousand/750/600
Ratio8/10/twelve.5/fourteen/sixteen/18/twenty
Screw diameter35/forty five/50/fifty five/65/75/90/a hundred/one zero five/a hundred and ten/a hundred and twenty/a hundred thirty/a hundred and fifty/160/a hundred sixty five
Spare partcoller, oil pump
Connected product Business Introduction Packing & Tractor Pushed Earth Augers Drills Put up Gap Digger Auger Device Shipping and delivery

Key Market Insights Related to Worm Reduction Gearboxes

A gearbox is a mechanical device that allows you to shift between different speeds or gears. It does so by using one or more clutches. Some gearboxes are single-clutch, while others use two clutches. You can even find a gearbox with closed bladders. These are also known as dual clutches and can shift gears more quickly than other types. Performance cars are designed with these types of gearboxes.
gearbox

Backlash measurement

Gearbox backlash is a common component that can cause noise or other problems in a car. In fact, the beats and sets of gears in a gearbox are often excited by the oscillations of the engine torque. Noise from gearboxes can be significant, particularly in secondary shafts that engage output gears with a differential ring. To measure backlash and other dimensional variations, an operator can periodically take the output shaft’s motion and compare it to a known value.
A comparator measures the angular displacement between two gears and displays the results. In one method, a secondary shaft is disengaged from the gearbox and a control gauge is attached to its end. A threaded pin is used to secure the differential crown to the secondary shaft. The output pinion is engaged with the differential ring with the aid of a control gauge. The angular displacement of the secondary shaft is then measured by using the dimensions of the output pinion.
Backlash measurements are important to ensure the smooth rotation of meshed gears. There are various types of backlash, which are classified according to the type of gear used. The first type is called circumferential backlash, which is the length of the pitch circle around which the gear rotates to make contact. The second type, angular backlash, is defined as the maximum angle of movement between two meshed gears, which allows the other gear to move when the other gear is stationary.
The backlash measurement for gearbox is one of the most important tests in the manufacturing process. It is a criterion of tightness or looseness in a gear set, and too much backlash can jam a gear set, causing it to interface on the weaker part of its gear teeth. When backlash is too tight, it can lead to gears jamming under thermal expansion. On the other hand, too much backlash is bad for performance.

Worm reduction gearboxes

Worm reduction gearboxes are used in the production of many different kinds of machines, including steel and power plants. They are also used extensively in the sugar and paper industries. The company is constantly aiming to improve their products and services to remain competitive in the global marketplace. The following is a summary of key market insights related to this type of gearbox. This report will help you make informed business decisions. Read on to learn more about the advantages of this type of gearbox.
Compared to conventional gear sets, worm reduction gearboxes have few disadvantages. Worm gear reducers are commonly available and manufacturers have standardized their mounting dimensions. There are no unique requirements for shaft length, height, and diameter. This makes them a very versatile piece of equipment. You can choose to use one or combine several worm gear reducers to fit your specific application. And because they have standardized ratios, you will not have to worry about matching up multiple gears and determining which ones fit.
One of the primary disadvantages of worm reduction gearboxes is their reduced efficiency. Worm reduction gearboxes usually have a maximum reduction ratio of five to sixty. The higher-performance hypoid gears have an output speed of around ten to twelve revolutions. In these cases, the reduced ratios are lower than those with conventional gearing. Worm reduction gearboxes are generally more efficient than hypoid gear sets, but they still have a low efficiency.
The worm reduction gearboxes have many advantages over traditional gearboxes. They are simple to maintain and can work in a range of different applications. Because of their reduced speed, they are perfect for conveyor belt systems.
gearbox

Worm reduction gearboxes with closed bladders

The worm and the gear mesh with each other in a combination of sliding and rolling movements. This sliding action is dominant at high reduction ratios, and the worm and gear are made of dissimilar metals, which results in friction and heat. This limits the efficiency of worm gears to around thirty to fifty percent. A softer material for the gear can be used to absorb shock loads during operation.
A normal gear changes its output independently once a sufficient load is applied. However, the backstop complicates the gear configuration. Worm gears require lubrication because of the sliding wear and friction introduced during movement. A common gear arrangement moves power at the peak load section of a tooth. The sliding happens at low speeds on either side of the apex and occurs at a low velocity.
Single-reduction gearboxes with closed bladders may not require a drain plug. The reservoir for a worm gear reducer is designed so that the gears are in constant contact with lubricant. However, the closed bladders will cause the worm gear to wear out more quickly, which can cause premature wear and increased energy consumption. In this case, the gears can be replaced.
Worm gears are commonly used for speed reduction applications. Unlike conventional gear sets, worm gears have higher reduction ratios. The number of gear teeth in the worm reduces the speed of a particular motor by a substantial amount. This makes worm gears an attractive option for hoisting applications. In addition to their increased efficiency, worm gears are compact and less prone to mechanical failure.

Shaft arrangement of a gearbox

The ray-diagram of a gearbox shows the arrangement of gears in the various shafts of the transmission. It also shows how the transmission produces different output speeds from a single speed. The ratios that represent the speed of the spindle are called the step ratio and the progression. A French engineer named Charles Renard introduced five basic series of gearbox speeds. The first series is the gear ratio and the second series is the reverse gear ratio.
The layout of the gear axle system in a gearbox relates to its speed ratio. In general, the speed ratio and the centre distance are coupled by the gear axles to form an efficient transmission. Other factors that may affect the layout of the gear axles include space constraints, the axial dimension, and the stressed equilibrium. In October 2009, the inventors of a manual transmission disclosed the invention as No. 2. These gears can be used to realize accurate gear ratios.
The input shaft 4 in the gear housing 16 is arranged radially with the gearbox output shaft. It drives the lubricating oil pump 2. The pump draws oil from a filter and container 21. It then delivers the lubricating oil into the rotation chamber 3. The chamber extends along the longitudinal direction of the gearbox input shaft 4, and it expands to its maximum diameter. The chamber is relatively large, due to a detent 43.
Different configurations of gearboxes are based on their mounting. The mounting of gearboxes to the driven equipment dictates the arrangement of shafts in the gearbox. In certain cases, space constraints also affect the shaft arrangement. This is the reason why the input shaft in a gearbox may be offset horizontally or vertically. However, the input shaft is hollow, so that it can be connected to lead through lines or clamping sets.
gearbox

Mounting of a gearbox

In the mathematical model of a gearbox, the mounting is defined as the relationship between the input and output shafts. This is also known as the Rotational Mount. It is one of the most popular types of models used for drivetrain simulation. This model is a simplified form of the rotational mount, which can be used in a reduced drivetrain model with physical parameters. The parameters that define the rotational mount are the TaiOut and TaiIn of the input and output shaft. The Rotational Mount is used to model torques between these two shafts.
The proper mounting of a gearbox is crucial for the performance of the machine. If the gearbox is not aligned properly, it may result in excessive stress and wear. It may also result in malfunctioning of the associated device. Improper mounting also increases the chances of the gearbox overheating or failing to transfer torque. It is essential to ensure that you check the mounting tolerance of a gearbox before installing it in a vehicle.

China Durable Using Low Price China EPT ZLYJ 146173200225250280315330375420450 series plastic extruder gearbox     synchromesh gearbox	China Durable Using Low Price China EPT ZLYJ 146173200225250280315330375420450 series plastic extruder gearbox     synchromesh gearbox
editor by czh 2023-02-16

China Gear Box Gpb Gpg Gearbox High Precision Planetary Gearhead with Low Price cycloidal drive mechanism

Item Description

TaiBang Motor Business Team Co., Ltd.

The primary goods is induction motor, reversible motor, DC brush gear motor, DC brushless equipment motor, CH/CV huge equipment motors, Planetary gear motor ,Worm equipment motor etc, which utilised extensively in numerous fields of production pipelining, transportation, meals, drugs, printing, cloth, packing, office, apparatus, entertainment and so on, and is the chosen and matched item for automated device. 

Model Instruction

GB090-ten-P2

GB 090 571 P2
Reducer Series Code Exterior Diameter Reduction Ratio Reducer Backlash
GB:Substantial Precision Square Flange Output

GBR:Substantial Precision Appropriate Angle Sq. Flange Output

GE:High Precision Spherical Flange Output

GER:Substantial Precision Proper Round Flange Output

050:ø50mm
070:ø70mm
090:ø90mm
one hundred twenty:ø120mm
a hundred and fifty five:ø155mm
205:ø205mm
235:ø235mm
042:42x42mm
060:60x60mm
090:90x90mm
115:115x115mm
142:142x142mm
180:180x180mm
220:220x220mm
571 indicates 1:10 P0:Substantial Precision Backlash

P1:Precision Backlash

P2:Standard Backlash

Principal Technological Performance
 

Item Variety of phase Reduction Ratio GB042 GB060 GB060A GB090 GB090A GB115 GB142 GB180 GB220
Rotary Inertia 1 three .03 .sixteen   .sixty one   3.25 9.21 28.98 69.sixty one
4 .03 .14   .48   2.seventy four seven.54 23.sixty seven fifty four.37
5 .03 .thirteen   .47   two.71 7.forty two 23.29 fifty three.27
six .03 .13   .forty five   two.65 seven.twenty five 22.seventy five 51.seventy two
seven .03 .thirteen   .45   2.62 seven.fourteen 22.forty eight 50.ninety seven
8 .03 .thirteen   .44   two.fifty eight 7.07 22.fifty nine fifty.84
9 .03 .13   .44   2.fifty seven 7.04 22.fifty three fifty.sixty three
10 .03 .13   .forty four   two.fifty seven seven.03 22.51 fifty.56
2 fifteen .03 .03 .13 .thirteen .forty seven .forty seven 2.seventy one 7.forty two 23.29
twenty .03 .03 .13 .thirteen .forty seven .47 2.seventy one 7.42 23.29
twenty five .03 .03 .thirteen .13 .forty seven .47 2.seventy one seven.42 23.29
30 .03 .03 .13 .thirteen .forty seven .47 two.71 seven.forty two 23.29
35 .03 .03 .thirteen .thirteen .forty seven .47 2.seventy one seven.forty two 23.29
forty .03 .03 .13 .thirteen .forty seven .forty seven 2.seventy one 7.42 23.29
45 .03 .03 .thirteen .13 .forty seven .47 2.seventy one seven.42 23.29
50 .03 .03 .13 .13 .forty four .44 two.fifty seven seven.03 22.51
60 .03 .03 .13 .thirteen .44 .44 two.fifty seven seven.03 22.fifty one
70 .03 .03 .13 .thirteen .forty four .44 2.57 7.03 22.51
eighty .03 .03 .13 .thirteen .forty four .forty four 2.57 seven.03 22.fifty one
ninety .03 .03 .thirteen .thirteen .forty four .44 two.57 seven.03 22.fifty one
100 .03 .03 .thirteen .thirteen .forty four .44 2.fifty seven seven.03 22.51

 

Item Variety of phase GB042 GB060 GB060A GB90 GB090A GB115 GB142 GB180 GB220
Backlash(arcmin) High Precision P0 one       ≤1 ≤1 ≤1 ≤1 ≤1 ≤1
two           ≤3 ≤3 ≤3 ≤3
Precision P1 one ≤3 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3
2 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5
Standard P2 1 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5
2 ≤7 ≤7 ≤7 ≤7 ≤7 ≤7 ≤7 ≤7 ≤7
Torsional Rigidity(N.M/arcmin) one 3 seven 7 fourteen 14 25 50 a hundred forty five 225
2 three 7 7 14 fourteen 25 fifty a hundred forty five 225
Noise(dB) one,two ≤56 ≤58 ≤58 ≤60 ≤60 ≤63 ≤65 ≤67 ≤70
Rated enter velocity(rpm) one,two 5000 5000 5000 4000 4000 4000 3000 3000 2000
Max input speed(rpm) 1,2 10000 ten thousand ten thousand 8000 8000 8000 6000 6000 4000

 Noise take a look at regular:Distance 1m,no load.Calculated with an enter velocity 3000rpm 

 

US $50
/ Piece
|
1 Piece

(Min. Order)

###

Application: Machinery, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Reduction
Layout: Cycloidal
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Double-Step

###

Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

GB 090 010 P2
Reducer Series Code External Diameter Reduction Ratio Reducer Backlash
GB:High Precision Square Flange Output

GBR:High Precision Right Angle Square Flange Output

GE:High Precision Round Flange Output

GER:High Precision Right Round Flange Output

050:ø50mm
070:ø70mm
090:ø90mm
120:ø120mm
155:ø155mm
205:ø205mm
235:ø235mm
042:42x42mm
060:60x60mm
090:90x90mm
115:115x115mm
142:142x142mm
180:180x180mm
220:220x220mm
010 means 1:10 P0:High Precision Backlash

P1:Precision Backlash

P2:Standard Backlash

###

Item Number of stage Reduction Ratio GB042 GB060 GB060A GB090 GB090A GB115 GB142 GB180 GB220
Rotary Inertia 1 3 0.03 0.16   0.61   3.25 9.21 28.98 69.61
4 0.03 0.14   0.48   2.74 7.54 23.67 54.37
5 0.03 0.13   0.47   2.71 7.42 23.29 53.27
6 0.03 0.13   0.45   2.65 7.25 22.75 51.72
7 0.03 0.13   0.45   2.62 7.14 22.48 50.97
8 0.03 0.13   0.44   2.58 7.07 22.59 50.84
9 0.03 0.13   0.44   2.57 7.04 22.53 50.63
10 0.03 0.13   0.44   2.57 7.03 22.51 50.56
2 15 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
20 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
25 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
30 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
35 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
40 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
45 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
50 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51
60 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51
70 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51
80 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51
90 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51
100 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51

###

Item Number of stage GB042 GB060 GB060A GB90 GB090A GB115 GB142 GB180 GB220
Backlash(arcmin) High Precision P0 1       ≤1 ≤1 ≤1 ≤1 ≤1 ≤1
2           ≤3 ≤3 ≤3 ≤3
Precision P1 1 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3
2 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5
Standard P2 1 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5
2 ≤7 ≤7 ≤7 ≤7 ≤7 ≤7 ≤7 ≤7 ≤7
Torsional Rigidity(N.M/arcmin) 1 3 7 7 14 14 25 50 145 225
2 3 7 7 14 14 25 50 145 225
Noise(dB) 1,2 ≤56 ≤58 ≤58 ≤60 ≤60 ≤63 ≤65 ≤67 ≤70
Rated input speed(rpm) 1,2 5000 5000 5000 4000 4000 4000 3000 3000 2000
Max input speed(rpm) 1,2 10000 10000 10000 8000 8000 8000 6000 6000 4000
US $50
/ Piece
|
1 Piece

(Min. Order)

###

Application: Machinery, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Reduction
Layout: Cycloidal
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Double-Step

###

Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

GB 090 010 P2
Reducer Series Code External Diameter Reduction Ratio Reducer Backlash
GB:High Precision Square Flange Output

GBR:High Precision Right Angle Square Flange Output

GE:High Precision Round Flange Output

GER:High Precision Right Round Flange Output

050:ø50mm
070:ø70mm
090:ø90mm
120:ø120mm
155:ø155mm
205:ø205mm
235:ø235mm
042:42x42mm
060:60x60mm
090:90x90mm
115:115x115mm
142:142x142mm
180:180x180mm
220:220x220mm
010 means 1:10 P0:High Precision Backlash

P1:Precision Backlash

P2:Standard Backlash

###

Item Number of stage Reduction Ratio GB042 GB060 GB060A GB090 GB090A GB115 GB142 GB180 GB220
Rotary Inertia 1 3 0.03 0.16   0.61   3.25 9.21 28.98 69.61
4 0.03 0.14   0.48   2.74 7.54 23.67 54.37
5 0.03 0.13   0.47   2.71 7.42 23.29 53.27
6 0.03 0.13   0.45   2.65 7.25 22.75 51.72
7 0.03 0.13   0.45   2.62 7.14 22.48 50.97
8 0.03 0.13   0.44   2.58 7.07 22.59 50.84
9 0.03 0.13   0.44   2.57 7.04 22.53 50.63
10 0.03 0.13   0.44   2.57 7.03 22.51 50.56
2 15 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
20 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
25 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
30 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
35 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
40 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
45 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
50 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51
60 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51
70 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51
80 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51
90 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51
100 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51

###

Item Number of stage GB042 GB060 GB060A GB90 GB090A GB115 GB142 GB180 GB220
Backlash(arcmin) High Precision P0 1       ≤1 ≤1 ≤1 ≤1 ≤1 ≤1
2           ≤3 ≤3 ≤3 ≤3
Precision P1 1 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3
2 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5
Standard P2 1 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5
2 ≤7 ≤7 ≤7 ≤7 ≤7 ≤7 ≤7 ≤7 ≤7
Torsional Rigidity(N.M/arcmin) 1 3 7 7 14 14 25 50 145 225
2 3 7 7 14 14 25 50 145 225
Noise(dB) 1,2 ≤56 ≤58 ≤58 ≤60 ≤60 ≤63 ≤65 ≤67 ≤70
Rated input speed(rpm) 1,2 5000 5000 5000 4000 4000 4000 3000 3000 2000
Max input speed(rpm) 1,2 10000 10000 10000 8000 8000 8000 6000 6000 4000

Condition Monitoring of Cyclone Gearboxes

Whether you’re considering using a cycloidal gearbox in your home, office, or garage, you’ll want to make sure it’s made of quality material. You also want to make sure it’s designed properly, so it won’t be damaged by vibrations.helical gearbox

Planetary gearboxes

Compared to cycloidal gearboxes, planetary gearboxes are lighter and more compact, but they lack the precision and durability of the former. They are better suited for applications with high torque or speed requirements. For this reason, they are usually used in robotics applications. But, cycloidal gearboxes are still better for some applications, including those involving shock loads.
There are many factors that affect the performance of gearboxes during production. One of these is the number of teeth. In the case of planetary gearboxes, the number of teeth increases with the number of planets. The number of teeth is reduced in cycloidal gearboxes, which results in higher transmission ratios. These gearboxes also have lower breakaway torques, which means that they can be controlled more easily by the user.
A cycloid gearbox is comprised of three main parts: the ring gear, the sun gear, and the input shaft. The ring gear is fixed in the gearbox, while the sun gear transmits the rotation to the planet gears. The input shaft transfers motion to the sun gear, which in turn transmits it to the output shaft. The output shaft has a larger torque than the input shaft.
Cycloid gears have better torsional stiffness, lower wear, and lower Hertzian contact stress. However, they are also larger in size and require highly accurate manufacturing. Cycloid gears can be more difficult to manufacture than involute gears, which require large amounts of precision.
Cycloid gears can offer transmission ratios up to 300:1, and they can do this in a small package. They also have lower wear and friction, which makes them ideal for applications that require a high transmission ratio.
Cycloid gearboxes are usually equipped with a backlash of about one angular minute. This backlash provides the precision and control necessary for accurate movement. They also provide low wear and shock load capacity.
Planetary gearboxes are available in single and two-stage designs, which increase in length as stages are added. In addition to the two stages, they can be equipped with an optional output bearing, which takes up mounting space. In some applications, a third stage is also available.

Involute gears

Generally, involute gears are more complex to manufacture than cycloidal gears. For example, an involute gear tooth profile has a single curve while a cycloidal gear tooth profile has two curves. In addition, the involute curve is not within the base circle.
The involute curve is a very important component of a gear tooth and it can significantly influence the quality of contact meshing between teeth. Various works have been done on the subject, mainly focusing on the operating principles. In addition, the most important characteristic of the double-enveloping cycloid drive is its double contact lines between the meshing tooth pairs.
Cycloid gears are more powerful, less noisy, and last longer than involute gears. They also require less manufacturing operations during production. However, cycloid gears are more expensive than involute gears. Involute gears are more commonly used in linear motions while cycloid gears are used for rotary motions.
Although cycloid gears are more technically advanced, involute gears have the superior quality and are more aesthetically pleasing. Cycloid gears are used in various industrial applications such as pumps and compressors. They are also widely used in the watch industry. Nevertheless, involute gears have not yet replaced cycloid gears in the watch industry.
The cycloid disc has a number of pins around its outer edge, while an involute gear has only a single curve for the teeth. In addition, cycloid gears have a more robust and reliable design. Involute gears, on the other hand, have a cheaper rack cutter and less expensive involute teeth.
The cycloid disc’s transmission accuracy is about 98.5%, while the ring gear’s transmission accuracy is about 96%. The cycloid disc’s rotational velocity has a magnitude of 3 rad/s. A small change in the center distance does not affect the transmission accuracy. However, rotational velocity fluctuation can affect the transmission accuracy.
Cycloid gears also have the cycloid gear disc’s rotational velocity. The disc has N lobes. However, the cycloid gear disc’s transmission accuracy is still not perfect. This is because of the large rotational angles between the lobes. This also makes it difficult to manufacture.helical gearbox

Vibrations

Using modern techniques for vibration diagnostics and data-driven methods, this article presents a new approach to condition monitoring of cycloidal gearboxes. This approach focuses on detecting the root cause of gearbox failure. The article aims to provide a unified approach to gear designers.
A cycloidal gearbox is a high-precision gearbox that is used in heavy-duty machines. It has a large reduction ratio, which makes it necessary to have a very large input speed. Cycloid gears have high accuracy, but they are susceptible to vibration issues. In this article, the authors describe how a cycloidal gearbox works and how vibrations are measured. They also show how this gearbox can be used to detect faults.
The gearbox is used in positioners, multi-axis robots, and heavy-duty machines. The main characteristics of this gearbox are the high accuracy, the overload capacity, and the large reduction ratio.
There is little documentation on vibrations and condition monitoring of cycloidal gearboxes. The authors describe their approach to the problem, using a cycloidal gearbox and a testing bench. Their approach involves measuring the frequency of the gearbox with different input speeds.
The results show a good separation between the healthy and damaged states. Fault frequencies show up in the lower orders of frequencies. Faults can be detected using binning, which eliminates the need for a tachometer. In addition, binning is combined with Principal Component Analysis to determine the state of the gearbox.
This method is compared to traditional techniques. In addition, the results show how binning can be used to calculate the defect frequencies of the bearings. It is also used to determine the frequencies of the components.
The signals from the test bench are acquired using four sensors. These sensors are medium sensitivity 100 mV/g accelerometers. The signals are then processed using different signal processing techniques. The results show that the vibration signals are correlated with the internal motion of the gearbox. This information is used to identify the internal frequency of the transmission.
The frequency analysis of vibration signals is performed in cyclostationary and noncyclostationary conditions. The signals are then analyzed to determine the magnitude of the gear meshing frequency.helical gearbox

Design

Using precision gearboxes, servomotors can now control heavy loads at high speed. Unlike cam indexing devices, cycloidal gears provide extremely accurate positioning and high torque. They also provide excellent torsional stiffness and shock load capacity.
Cycloid gears are specially designed to minimize vibration at high RPM. Unlike involute gears, they are not stacked, which reduces friction and forces experienced by each tooth. In addition, cycloidal gears have lower Hertzian contact stress.
Cycloid gears are often used in multi-axis robots for positioners. They can provide transmission ratios as high as 300:1 in a compact package. They are also used in first joints in heavy machines. However, they require extremely accurate manufacturing. They are also more difficult to produce than involute gears.
A cycloidal gearbox is a type of planetary gearbox. Cycloid gears are specially designed for high gear ratios. They also have the ability to provide a large reduction ratio in a single stage. They are increasingly used in first joints in heavy machines. They are also becoming more common in robotics.
In order to achieve a large reduction ratio, the input speed of the gear must be very high. Generally, the input speed is between 500 rpm and 4500 rpm. However, in some cases, the input speed may be lower.
A cycloid is formed by rolling a rolling circle on a base circle. The ratio between the rolling circle diameter and the base circle diameter determines the shape of the cycloid. A hypocycloid is formed by rolling primarily on the inside of the base circle, while an epicycloid is formed by rolling primarily on the outside of the base circle.
Cycloid gears have a very small backlash, which minimizes the forces experienced by each tooth. These gears also have a good torsional stiffness, low friction, and shock load capacity. They also provide the best positioning accuracy.
The cycloidal gearbox was designed and built at Radom University. The design was based on three different cycloidal gears. The first pair had the external profile at the nominal dimension, while the second pair had the profile minus tolerance. The load plate had threaded screw holes arranged 15 mm away from the center.
China Gear Box Gpb Gpg Gearbox High Precision Planetary Gearhead with Low Price     cycloidal drive mechanismChina Gear Box Gpb Gpg Gearbox High Precision Planetary Gearhead with Low Price     cycloidal drive mechanism
editor by czh 2023-01-19

China Low Price Cycloid Gearbox Nema 17 Reducer Stepper Harmonic Gear With High Quality gearbox assembly

Warranty: 1year, 1 Year
Applicable Industries: Manufacturing Plant, Machinery Repair Shops, Retail
Weight (KG): 0.9 KG
Customized support: OEM, ODM, OEM, ODM
Gearing Arrangement: Harmonic
Output Torque: 46-169.15Nm
Input Speed: 2000-4000r/min
Output Speed: 12.5-80rpm/min
Material: Cast Iron
Mounting Position: Horizontal (foot Mounted)
Life Span: 10000 hours
Arc: ≤30
Noise: <50dB
Certification: CE, CCC, ISO
Quality: 100% Tested
Structures: Bearing + Gear + Box
Packaging Details: Carton + foam, a large number, will be packed into wooden cases.

ModelSpeed ratioEnter the rated torque at 2000r/minAllowed CZPT torque at start stopThe allowable maximum of the average load torque
NmkgfmNmkgfmNmkgfm
11803.80.48.50.96.80.7
1004.10.48.90.97.20.7
14506.20.620.72.17.90.7
8090.9272.712.71.3
10090.9323.312.71.3
175018.41.939429.93
8025.32.649.55313.2
10027.62.8626.3454.6
205028.82.964.46.6394
8039.14858.8545.5
100464.794.39.6565.8
120464.710010.2565.8
160464.711210.9565.8
255044.94.611311.5636.5
8072.57.415816.110010.2
10077.17.918118.412412.7
12077.17.919219.612412.7
325087.48.924825.312412.7
80135.713.835035.619219.6
100157.616.138339.124825.3
120157.616.140641.424825.3
Maximum torque is allowed in an instantAllow the maximum speed to be enteredAverage input speed is allowedBack gapdesign life
Nmkgfmr/hinr/hinArcSecHour
19.11.980003000≤3010000
202
40.34.170003000≤3015000
54.15.5
62.16.3
80.58.265003000≤3015000
100.110.2
124.212.7
112.711.556003000≤3015000
146.114.9
169.117.2
169.117.2
169.117.2
213.921.848003000≤3015000
293.329.9
326.633.3
349.635.6
43944.840003000≤3015000
65366.6
74475.9
78980.5
More Products Company View Exhibitions Certifications Factory & Show Room Packaging &Shipping FAQ Q: What should I provide when I choose gearbox/speed reducer?A: The best way is to provide the motor drawing with parameter. Our engineer will check and recommend the most suitable gearbox model for your refer. Or you can also provide below specification as well:1) Type, model and torque.2) Ratio or output speed3) Working condition and connection method4) Quality and installed machine name5) Input mode and input speed6) Motor brand model or flange and motor shaft size

What Is a Gearbox?

A gearbox is the mechanical system of an automobile that allows a vehicle to change gear smoothly. This arrangement of gears is highly complex, which helps to provide a smooth gear change. In this article, we will explore some of the different types of gearboxes, including the Epicyclic gearbox, the Coaxial helical gearbox, and the Extruder helical gearing. These are three of the most common types of gearboxes used in automobiles.
gearbox

Gearboxes

Gearboxes help drivers choose the appropriate gear for the conditions. A lower gear produces the least speed, while a higher gear gives the maximum torque. The number of gears used in a gearbox varies to meet different demands on the road and load. Short gearing provides maximum torque, while tall gearing offers higher top speeds. These features combine to improve the driveability of a vehicle. But what is a gearbox?
The gearbox has a slew of components, including the bearings and seals. Among these components is the gearbox, which is subjected to wear and tear due to metal-to-metal contact. As a result, gearboxes require close monitoring. Various tests are used to assess the condition of gears, such as corrosion and wear. Proactive tests emphasize wear, contamination, and oil condition. However, there are also proactive tests, such as the ferrous density test and the AN test, which monitor additive depletion and abnormal wear.
The separating force is a key factor for the design of a gearbox. The primary radial measurement point should be oriented to monitor normal forces. The secondary measurement point should be located in the opposite direction of rotation from the primary radial measurement point. The separating force generated by a helical gear set is called tangential force. The primary and secondary radial measurement points should be positioned so as to provide information about both normal and tangential forces.
Manual gearboxes are often manual. The driver can control the synchromesh by using a selector rod. This rod moves the synchromesh to engage the gear. Reverse gears are not synchromesh because they are used only when the vehicle is at a standstill. In older cars, the first gear often lacked synchromesh due to cost or lack of torque. Drivers could still use first gear with a double-declutch.

Coaxial helical gearbox

The R series rigid tooth flank helical gearbox features high versatility and good combination. They have a wide range of motor power and allow for fine classification of transmission ratios. The R series gearbox has several advantages, including high efficiency, long service life, and low vibration. This series of gearbox can be combined with a wide range of reducers and variators. Its size and high performance makes it an ideal choice for applications that require maximum torque and load transfer.
The main feature of a helical gearbox is that it presents a fixed velocity ratio, even if the center gaps are not perfectly set. This is sometimes referred to as the fundamental rule of gearing. A helical gearbox is similar to paper spur gears in terms of radial pitch, since the shafts in the helical gearbox cross at an angle. The center gap of a helical gearbox is the same for both the left and right-handed counterparts.
The EP Series is another popular model of a Coaxial helical gearbox. This series has high torque and a maximum reduction ratio of 25.6:1. It is an ideal choice for the plastic industry, and CZPT offers an extensive range of models. Their center distance ranges from 112 mm to 450 mm. The EP Series has several models with different center distances. In addition to high torque and efficiency, this gearbox has low noise and vibration, and it is easy to assemble and disassemble.
Another type of Coaxial helical gearboxes is the planetary gearbox. They have a high efficiency and power density. Unlike coaxial helical gearboxes, planetary gearboxes have an axis on the same direction as the output shaft. They are easy to integrate into existing drive trains. In addition, they are compact and easy to integrate with existing drive trains. For servo applications, they are another great choice.
gearbox

Epicyclic gearbox

An epicyclic gearbox is a type of automatic gearbox used to drive cars. Its primary advantage is its compact design, and it is more reliable and efficient than manual gearboxes. It is comprised of a sun gear and two planetary gears, encased in a ring gear called the Annulus. This system is useful for drivers who need to shift gears frequently, as they will become tired if the gears are suddenly changed.
An epicyclic gearbox consists of three different types of gears: ring gear, sun gear, and annular ring gear. The ring gear is the outermost gear and has angular-cut teeth on its inner surface. It is used in conjunction with planetary gears to provide high-speed ratios to vehicles. The sun gear also reverses the direction of the output shaft. This helps reduce transmission error.
An epicyclic gearbox uses multiple planets to transfer power between the planets. This type of gearbox is lightweight and features a high power density. This gearbox has several benefits over a standard single-stage parallel axis gearbox, including multiple load paths, unequal load sharing, and phased meshing. Furthermore, epicyclic gearboxes require more complex transmission error optimisation than their counterparts, including more than one stage.
The objective of epicyclic gearbox research is to provide the lowest transmission error possible. The process includes an initial design and detailed specification. The system is defined by its load spectrum and required ratio. Deflections of the elastic mesh are calculated to understand their strength and how much energy the system can handle. Finally, micro-geometric corrections minimize transmission error. These improvements are crucial to the overall efficiency of an epicyclic gearbox.

Extruder helical gearing

The helix in an extruder helical gearing is fixed at an angle, enabling more interaction with the shaft in the same direction as it moves. As a result, the shaft and the bearing are in constant contact for a long period of time. Typically, extruder helical gearing is used in applications where there is low excitement, such as steel, rolling mills, conveyors, and the oil industry. The bevel gear train also plays a role in these applications.
The CZPT AEX extruder drive gear is specifically developed for this specific application. The gears are compact and lightweight and offer exceptional power density and a long service life. These extruder gears are highly reliable, and they can be used in a wide range of applications, including rubber processing, food production, and recycling plants. CZPT offers both standard and custom gearing for your extruder.
Another advantage of helical gearing is its versatility. Since the helical gearing teeth are inclined at a specific angle, they can be adjusted to meet the specific needs of a given application. These gears also have the advantage of eliminating noise and shock from straight teeth. Unlike other gearing types, they are able to achieve a wide range of loads, from small to large. These helical gears are very durable and are the best option for high-load applications.
In addition to this, asymmetric helical gears have increased flexibility, while asymmetrical helical gears have lower flexural stiffness. The ratio of teeth to the shaft has a positive effect on the strength of the gear. Furthermore, asymmetrical helical gears are easier to manufacture. But before you purchase your next extruder gear, make sure you know what you’re getting into.
gearbox

1 speed gearbox

CZPT Group Components produces the one speed gearbox. It has the potential to make cars more efficient and environmentally friendly. The gear ratio of a car’s drivetrain is crucial for reaching maximum power and speed. Typically, a one-speed gearbox delivers a maximum of 200 hp. But the speed at which a car can reach this power must be high to get the full benefit from the electric motor. So, how can a one-speed gearbox improve the speed and torque of a car?
A one-speed gearbox is a mechanical device used to switch between second and third gears. It can include multiple gear sets, such as a shared middle gear for switching between second and third gears. It can also have an intermediate gear set that represents a switchable gear in both partial transmissions. The invention also includes a mechanism that makes it easier to change gears. The patent claims are detailed below. A typical one-speed gearbox may include two parts.
Generally, a one-speed gearbox will have up to seven forward gears, with each of these corresponding to a different speed. A one-speed gearbox can have five different gear sets and five different gear levels. It can have synchronized gear sets or last-shelf gear sets. In either case, the gears are arranged in a way that maximizes their efficiency. If the gears are placed on opposite sides of a car, the transmission may be a two-speed one.
CZPT Transmission specializes in the production of high-speed gearboxes. The company’s Milltronics HBM110XT gearbox machine is the perfect tool for this job. This machine has a large working table and a heavy-duty load capacity, making it a versatile option for many kinds of applications. There are also a wide variety of CZPT gearboxes for the automotive industry.

China Low Price Cycloid Gearbox Nema 17 Reducer Stepper Harmonic Gear With High Quality     gearbox assembly	China Low Price Cycloid Gearbox Nema 17 Reducer Stepper Harmonic Gear With High Quality     gearbox assembly
editor by czh

Rexroth made in China – replacement parts – in Irkutsk Russian Federation Winch Drive Gearbox Gft110 W3 6372 Reduction Gearbox with ce certificate top quality low price

Rexroth  made in China - replacement parts -  in Irkutsk Russian Federation  Winch Drive Gearbox Gft110 W3 6372 Reduction Gearbox with ce certificate top quality low price

Rexroth  made in China - replacement parts -  in Irkutsk Russian Federation  Winch Drive Gearbox Gft110 W3 6372 Reduction Gearbox with ce certificate top quality low price

We – EPG Group the bigge EPT Chain and agricultural gearbox manufacturing unit in China with 5 different branches. For more details: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

Rexroth Planetary Gearbox, Final Travel GFT 110 W3 6372 
sany  rotary drilling  rig. main winch REDUCER

Rexroth winch push gearbox GFT110W3 6372 planetary gearbox

1, excellent good quality
two, minimal cost, EPT Rexroth motor reducer
3, provide shortly

Major performances Unit Parameters
Overall height(chassis/ EPT chassis) mm 22,660/22,seven hundred
Working excess weight(chassis/ EPT chassis) t 80/82
Max. pile diameter mm two,200
Max. pile depth(friction Kelly/inter-locking Kelly) m 84/fifty eight
Rotary Travel
Max. output torque kN.m 280
Pace of rotation rpm 9~24
Crowd method
Crowd power kN 220
Line pull kN 220
Stroke mm seven,five hundred
Main winch
Line pull(1 EPT layer) kN 290
Rope diameter mm 32
Max. line velocity m/min forty eight
Auxiliary winch
Line pull(1 EPT layer) kN a hundred and ten
Rope diameter mm twenty
Max. line velocity m/min 70
Ma EPT inclination
Forward ° 3
Lateral ° ±3.5

Gft110 W3 6372 

Our firm can produce rexroth gearbox according to customer’ requirement.

HYDROTRAC GFT is an best driving component for wheel or keep track of driving cars, and EPT moving products and commonly used in excavator, spreading machine, drill equipment, mobile crusher, engineering equipment, mining, tunnel equipment, agricultural machinery, and many others. In the meantime, different motor connectors and proportions are accessible on request. It is an ideal substitute of Rexroth items.
Rexroth Gft Planetary Gearbox, Last Travel GFT17 GFT24 Gft36 GFT 40 GFT50 Gft60 Gft80 Gft110 Gft160
R988006394 GFT80W3B99-fifteen
R988006524 GFT80W3B99-24
R988006398 GFT80W3B99-28
R988006399 GFT80W3B99-29
R988006532 GFT80W3B99-31
R98805710 GFT80W3B99-37
R988006531 GFT60W3B86-02
R988006536 GFT60W3B86-07
R9880 0571 8 GFT60W3B86~571-8822571/8822 0571
R988006544 GFT60W3B86~13083988828 13858117778
R988006344 GFT60W3B86~571-8822571/8822 0571
R98857133 GFT60W3B86~571-8822571/8822 0571
R988 0571 29 GFT7T2B51-01
R98857156 GFT7T2B63-01
R9880 0571 9 GFT80T3-185-03
R9880 0571 6 GFT80T3B127-01 W/O MOTOR
R988056701 GFT80T3B127-09
R988064513 GFT80T3B127-09 W/O MOTOR
R988006366 GFT80T3B150-01
R988006367 GFT80T3B150-02
R988006370 GFT80T3B185-06
R98857127 GFT80T3B185-ten
R988049613 GFT80T3B185-10 W/O MOTOR
R988062758 GFT80T3B185-eleven
R988006374 GFT80T3B204
R988006375 GFT80T3B77-01
R988006551 GFT80W3B127-07
R988006866 GFT80W3B127-fourteen
R988018309 GFT80W3B127-seventeen
R98857113 GFT80W3B127-19
R98857163 GFT60A3B65-03
R988006277 GFT60T3B106-03
R9880 0571 6 GFT60T3B106-05 W/O MOTOR
R988006284 GFT60T3B106-thirteen
R988006286 GFT60T3B120-06
R988 0571 31 GFT60T3B140-19
R988 0571 1 GFT60T3B140-20
R988006307 GFT60T3B170-06
R988006308 GFT60T3B170-08
R9880 0571 5 GFT60T3B170-twelve W/O MOTOR
R988 0571 30 GFT60T3B64-01
R9880 0571 4 GFT60T3B86-02
R9880 0571 2 GFT60W3B106-06
R9880 0571 3 GFT60W3B106-11
R988054345 GFT60W3B106-20
R988018532 GFT60W3B170-11
R988007035 GFT60W3B400 W/O MOTOR
R988006589 GFT60W3B64-01
R988006591 GFT60W3B64-02
R988006526 GFT60W3B64-03
R9885711 GFT60W3B64-09
R988054749 GFT60W3B64-10
R988064141 GFT60W3B64-twelve
R988006136 GFT24T2B19-01
R988006137 GFT24T2B19-03
R988006143 GFT24T3B103-07
R988049105 GFT26T2B43-08
R988006159 GFT26T2B51-02
R988006160 GFT26T2B62-06
R988006173 GFT26W2B62-06
R988006177 GFT26W2B62-10
R988006178 GFT26W2B62-fifteen
R988018533 GFT26W2B62-20
R988 0571 37 GFT34T2B43-01
R988006187 GFT36T2B28-02
R988006189 GFT36T3-131-04
R9885719 GFT36T3-131-04 W/O MOTOR
R988006199 GFT36T3B100-12
R988006216 GFT36T3B139-01
R9885712 GFT36T3B139-02 W/O MOTOR
R988046030 GFT36T3B139-07
R988 0571 fifty seven GFT36T3B67-15
R988006228 GFT36T3B79-09
R988006966 GFT36T3B79-09 W/O MOTOR
R988065729 GFT36W3B100-06
R988006244 GFT36W3B67-03
R988017691 GFT36W3B67-16
R988006255 GFT36W3B79-25
R988040808 GFT36W3B79-30
R98857110 GFT36W3B79-32
R9885718 GFT40T2B41-04
R98804 0571 GFT40T2B41-05
R988006266 GFT40W2B49-01
R988006267 GFT40W2B49-02
R988046595 GFT40W2B59-fifteen
R98857123 GFT40W2B59-16
R988 0571 31 GFT40W2B59-17
R988 0571 63 GFT50T3B100-01
R98857162 GFT50T3B177-04
R988006274 GFT60A2B40-01
R98805711 GFT110W3B96-09
R988018531 GFT110W3B96-21
R988044467 GFT110W3B96-28
R988 0571 eleven GFT110W3B96-thirty
R988 0571 15 GFT110W3B96-34
R98857173 GFT110W3B96-36
R98857175 GFT110W3B96-38
R988065817 GFT110W3B96-forty
R988017539 GFT13T2B32-01
R988006082 GFT17T2B45-21
R988006086 GFT17T2B45-twenty five
R988017334 GFT17T2B45-33
R988006089 GFT17T2B54-04
R988006090 GFT17T2B54-05
R988006093 GFT17T2B54-09
R988006886 GFT17T2B54-12 W/O MOTOR
R98857112 GFT17T2B54-22
R988006105 GFT17T3B78-07
R98857124 GFT17T3B88-05
R988006118 GFT17W2B45-fifteen
R988006119 GFT17W2B45-16
R988058732 GFT17W3B78-06 W/O MOTOR
R91605715 GFT2160E/30-AAAA0045M1-HA1/0170AS0-0CJ
R916008231 GFT2160E/thirty-AAAA0045M1-HA1/0170AS0-0CJ
R988056777 GFB26T2B52-02
R988005877 GFB26T2B63-12
R988005879 GFB36T2B24-04
R988005881 GFB36T2B24-06
R988056999 GFB36T3B101-twelve
R988005909 GFB36T3B101-29
R9885710 GFB36T3B101-thirty
R9885711 GFB36T3B101-31
R9885713 GFB36T3B101-33
R9885717 GFB36T3B101-37
R988006816 GFB36T3B101-38
R98805712 GFB36T3B118-06
R98805714 GFB36T3B118-10
R98857185 GFB36T3B118-11
R988048093 GFB36T3B118-twelve
R98857195 GFB36T3B132-10
R988054750 GFB36T3B132-eleven
R9885711 GFB36T3B68-03
R9885713 GFB36T3B68-05
R988046591 GFB36T3B68-11
R98805713 GFB36T3B80-fifteen
R98805715 GFB36T3B80-17
R9880571 GFB36T3B80-seventeen W/O MOTOR
R98805717 GFB40T2B49-01

The use of unique equipment manufacturer’s (OEM) element numbers or emblems , e.g. CASE® and John Deere® are for reference functions only and for indicating merchandise use and compatibility. Our company and the detailed alternative areas contained herein are not sponsored, authorized, or made by the OEM.

Rexroth  made in China - replacement parts -  in Irkutsk Russian Federation  Winch Drive Gearbox Gft110 W3 6372 Reduction Gearbox with ce certificate top quality low price

Rexroth  made in China - replacement parts -  in Irkutsk Russian Federation  Winch Drive Gearbox Gft110 W3 6372 Reduction Gearbox with ce certificate top quality low price

Rexroth  made in China - replacement parts -  in Irkutsk Russian Federation  Winch Drive Gearbox Gft110 W3 6372 Reduction Gearbox with ce certificate top quality low price

High made in China – replacement parts – in Marrakech Morocco Precision Steel Spur Gear for Gearbox Servo Motor with ce certificate top quality low price

High  made in China - replacement parts -  in Marrakech Morocco  Precision Steel Spur Gear for Gearbox Servo Motor with ce certificate top quality low price

High  made in China - replacement parts -  in Marrakech Morocco  Precision Steel Spur Gear for Gearbox Servo Motor with ce certificate top quality low price

We – EPG Group the bigge EPT Chain and agricultural gearbox manufacturing facility in China with 5 different branches. For much more information: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

High Precision steel Spur Gear for Gearbox Servo Motor

Area&colon As your requirement

Substance&colon Metal &sol aluminum &sol brass &sol iron &sol zinc &sol alloy

Any EPT materials and dimension is dependent on customers’ desire&period of time

Utilization&colon EPT &sol home furniture &sol toy &sol woodboard &sol wall

Euipment&colon CNC Machining equipment

Testing products&colon Projector

Market Concentrate Appliance&sol Automotive&sol Agricultural Electronics&sol Industrial&sol EPT Mining&sol Hydraulics&sol Valves Oil and Fuel&sol Electrical&sol Construction

Industry Expectations ISO 9001&colon 2008 PPAP Ro EPT Compliant

Additional Capabilities C EPT Design and style Solutions CAM Programming Services Coordinate Measuring Machines &lparCMM&rpar Reverse Engineering

Specification personalized made
Our characteristics 1&period 14 several years history  2&period Quick guide time  3&periodGood following-sale support
four&period of time Free samples offered
Materials Stainless steel&comma copper&comma brass&comma carbon metal&comma aluminum
&lparaccording to customer’s necessity&period
Surface area Remedy Zn-plating&comma Ni-plating&comma Cr-plating&comma Tin-plating&comma copper-plating&comma the wreath oxygen resin spraying&comma
the warmth disposing&comma scorching-dip galvanizing&comma black oxide coating&comma painting&comma powdering&comma shade zinc-plated&comma
blue black zinc-plated&comma ru EPT preventive oil&comma titanium alloy galvanized&comma silver plating&comma plastic&comma electroplating&comma anodizing and so forth&period
Primary Items Precision screw&commabolt&comma nuts&commafastener&commaknob&commapins&comma bushing&comma sleeve&commagear&comma stamping components&commawasher&commagasket&comma
plastic molding injection areas&comma
standoff&commaCNC machining services&commaaccessories and so on&interval
Producing Gear CNC equipment &comma automated lathe device&commastamping machine&commaCNC milling machine&commarolling machine&commalasering&commatag grinding machine etc&period
Administration Method ISO9001 – 2008
Available Certification RoHS&comma SGS&comma Substance Certification
Testing Gear Projecting equipment&comma Salt Spray Check&comma Durometer&comma and Coating thickness tester &comma 2d projector
Guide time 10-15 operating days as normal&commaIt will based on the in depth buy quantity&period
Controlling Returned Merchandise With top quality difficulty or deviation from drawings
Delivery of Samples By DHL&commaFedex&commaUPS&comma TNT&commaEMS&Hat&Hat
Warranty Substitution at all our co EPT for rejected products
Major Marketplaces North The us&comma South The us&comma EPT Europe &comma We EPT Europe &comma North Europe&comma South Europe&comma Asia
How to buy &ast You deliver us drawing or sample
&ast We carry through undertaking evaluation
&ast We give you our design for your confirmation
&ast We make the sample and ship it to you following you confirmed our design
&ast You confirm the sample then location an get and pay out us 30&percnt deposit
&ast We begin creating
&ast When the goods is completed&comma you pay out us the balance soon after you verified photographs or monitoring quantities&interval
&ast Trade is accomplished&comma thank you&excl&excl
Programs Toy&commaAutomotive&comma instrument&comma electrical products&comma home appliances&comma furniture&comma mechanical products&comma
everyday residing tools&comma electronic sporting activities tools&comma mild business merchandise&comma sanitation equipment&comma
marketplace&sol hotel products materials&comma artware and so on&time period

The use of first gear manufacturer’s (OEM) portion numbers or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating merchandise use and compatibility. Our business and the shown alternative components contained herein are not sponsored, accepted, or made by the OEM.

High  made in China - replacement parts -  in Marrakech Morocco  Precision Steel Spur Gear for Gearbox Servo Motor with ce certificate top quality low price

High  made in China - replacement parts -  in Marrakech Morocco  Precision Steel Spur Gear for Gearbox Servo Motor with ce certificate top quality low price

High  made in China - replacement parts -  in Marrakech Morocco  Precision Steel Spur Gear for Gearbox Servo Motor with ce certificate top quality low price

40HP shop made in China – replacement parts – how to remove bush hog gearbox 4*4 Farming Agri Agricultural Farm Diesel Engine Garden Lawn Tractor with ce certificate top quality low price

We – EPG Group the biggest agricultural gearbox and pto factory in China with 5 different branches. For more information: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828

40HP  shop  made in China - replacement parts -   how to remove bush hog gearbox 4*4 Farming Agri Agricultural Farm Diesel Engine Backyard Garden Tractor with ce certificate best good quality low price tag

extensive angle pto shaft go over Our pto shaft repair products limited pto shaft is s10 prolonged cab push shaft common 1310 driveshaft exported broad angle pto shaft guard to 2011 mustang gt driveshaft the 2005 jeep grand cherokee 5.7 front push shaft United bmw e30 driveshaft States, front push shaft common joint substitution Germany, Australia, Russia, Spain, Hungary, Zimbabwe, Ukraine, Nigeria, Peru, Brazil, Middle and South The us, Thailand, Pakistan, Indonesia, much more than 60 countries and locations. EPG is inclined to cooperate sincerely and develop commonly with buddies! 40HP 4*4 Farming/Agri/Agricultural/Farm/ EPT Motor/Backyard garden/Lawn Tractor

Specialized Parameter

 

Model TL400 TL404 TL450 TL454
Driving Type 4*two 4*four four*two 4*four
Engine Product XC490T XC490T XC495 XC495
Rated power(kw) 29.four 29.four 33 33
Rated Traction (kN) 6.8 9.five 7 ten
Overall dimension
(L*W*H)
3650×1666×2160 3650×1666×2160
Tread Front(mm) 1170 1340 1170 1340
Rear(mm) 1300 1300 1300 1300
Wheelbase(mm) 1905 1965 1905 1965
Weight (kg) 1530 1700 1530 1700
Tyre Front five.fifty-sixteen 7.fifty-sixteen 5.50-sixteen seven.50-16
Rear eleven.2-28 11.2-28 eleven.2-28 eleven.2-28
PTO(RPM)   540,760
Speed (Km/h) Forward: 2.32-27.35
 Backward: 3.12-twelve.22
Others Front Ballast Weight and
 1 layer Rear Ballast Weight,air brake
CBU, PCS IN A 40’HC 4

Tractor Characteristics

one.Fuel intake achieve upto 1 liter/hour diesel.
2. Differential lock avert rear whee EPT skidding when climbing, operating in paddy land and wet temperature.
3.Equip with double pace of PTO shaft 540/760 rpm. Tailored to different discipline type.
4.Adopt entire hydraulic steering, independent gasoline tank, effortless working and high mobility. 
5.Adju EPT entrance and rear tracks satisfy agricultural requirements of diverse regions. Added-large water tank and high capacity servicing-cost-free battery make the device with ideal heat-dispersion and commencing performance.
6.Can undertake to various implements,these kinds of as plough,disc plough,ratory tiller,disc harrow,etc.

Company Profile

TANGLAND EPT Organization, is a wholly-owned subsidiary of TANGLAND Group, is the expert business for Investing & EPT Exchange and cooperation. We set up branches in ZheJiang , ZheJiang and HangZhou, as properly as overseas assembling plant, or/and displaying room and service centre, in Pakistan, UAE, and some Asian & African international locations. TANGLAND Group is a comprehensive business including manufacturing, assembling, Casting & Foundry, producing Casting components, Electrical Car, Tractor, Light truck, Semi-trailer, Steel ball and Nylon 6 goods, Managing an Industrial products’Information & Trade System, the headquarter is in Ji’nan, ZheJiang , and assembling, machining & foundry and castingplants are in HangZhou, HangZhou, HangZhou and HangZhou, theInformation and Trade system named-TANGLANDINFORMATION & Technological innovation Organization. TANGLAND International.

 

We are mostly dealing with the importing and exporting, for Machineries, Automobiles, Equipments, Building Supplies, Metal &Iron, Casting Foundry and relevant elements & elements, regular Chemical, Nylon 6 products, Healthcare supplies and consumables, and so on., there are our very own 2000 sellers, abroad storages, overseas businesses, our turnover is US dollar a hundred and fifty Million, with our professional trading crew efforts, and the eyesight to Create the Value for all the buyers and sellers.

 

We export 8000 sets Agricultural devices, 5000 models various light and Medium/heavy responsibility trucks, Semi-trailers, thirty,000 sets  EPT engine and Generator sets, 15,000 tons various Casting parts, these kinds of as Pipe and fittings, Housing, and many others., Steel/Iron Balls, 10,000 tons Nylon 6 Twine fabric and Yarn in the year 2016, we gather a good deal of positive aspects for Agricultural devices, Transporting Cars, Electrical power equipments, Casting Components and Industrial resources, and take pleasure in the great marketing and advertising shares in One Belt & One Road nations, accumulate the exporting, marketing and advertising and companies encounters, located up the Sales+Provider business mode, cooperate with dealers, agents, fix the challenges in devices exporting enterprise, e.g., support, spare parts providing, specialized supporting, warranty, and many others., and start the assembling and localization in some markets, which strengthen the admit and dependability from clientele and users.

 

TANGLND Religion: To create the value for all the customers is the only cause for TANGLAND existence.

Workshop

Bundle

Our Provider

Pre-Product sales Support

1. Inquiry and consulting assist.
two. Sample testing assist.
3.See our Factory.

Soon after-Product sales Service

one.Coaching how to set up the machine, instruction how to use,sustain and restore the equipment.
2.Engineers obtainable to service equipment abroad.

FAQ

Q1.What is your phrases of payment?
A:T/T 60% as deposit,and 40% ahead of loading.we will present you the photos of the products and packages prior to you spend the balance.

Q2.What your conditions of supply?
A:EXW,FOB,CFR,CIF,DAF.

Q3.How about your delivery time?
A:Usually,it will take about twenty times soon after receipt of deposit payment.The specific shipping and delivery time relies upon on the items and the quantity of your order.

Q4.Are you intrigued in dealership with neighborhood business?
A:Sure,we are really intrigued in this business.we’d like to cooperate with some nearby companion to market far more tractors in neighborhood marketplace and source much better service.

Q5.Do you test all your tractors ahead of shipping and delivery?
A:Yes,we have one hundred% tractor test and complete quality management program prior to supply.

Q6.How do you make our business extended-term and great romantic relationship?
A:1.We keep very good good quality,aggressive value and successful provider to guarantee our clients gain
    2.We protect the gain of dealer or agent,in specifical interval and location.
 

40HP  shop  made in China - replacement parts -   how to remove bush hog gearbox 4*4 Farming Agri Agricultural Farm Diesel Engine Yard Lawn Tractor with ce certification best top quality minimal value